Sanyo LNS-W10 instruction manual Intercom ring tone, Call toggling

Page 22

This feature only works if you have 2 handsets registered to the base unit.

MULTI-HANDSET CONFIGURATION

1.Press INT on the first handset.

2.Press or to select the desired handset or choose “CALL ALL”.

3.Press TALK to place the call. The selected handset will ring. If you select “CALL ALL”, all other handsets registered to the base unit will ring. If the

 

selected handset is not available (off hook, on another call), “BUSY” shows.

4.

To accept the intercom call on the handset, press

TALK.

5.

To exit intercom mode on the first handset, press

TALK.

Note: During the first handset calls the other handsets, there may be an incoming call in which the first handset will hear a call waiting tone and the other handset will return to normal incoming call tone.

Intercom ring tone

You can change the ring tone for an intercom call to differentiate internal from

external calls. To change the ring tone please see the Handset Ring Tone Setting section on page 12 for more information.

Call toggling

This feature only works if you have 2 handsets registered to the base unit. The feature allows you to put an external call on hold while you place an intercom call to another handset. Only the handset that initiates call toggling can place callers on hold or end the call.

1.Establish contact with an external party by either placing a call or answering an incoming call.

2.Press INT to put the external call on hold and enter intercom mode.

3. Press the number (1-4) for the handset you wish to select, or use the

or

keys to select the handset.

 

4.Press TALK to place an intercom call to the selected handset. “H” shows on the display to indicate the external call is on hold.

5.Press INT key on the handset that initiates call toggling to place the intercom on hold and return to the external call.

6.Press TALK key on the selected handset to end the intercom call and return to the external call.

Note : If the selected handset is not available, “BUSY” shows and then a callback is generated. “CALL BACK” is displayed on the handset display. You can press TALK to return to the caller.

22

Image 22
Contents GHz Sanyo Canada IncTable of Contents Causes of Poor Reception ...………………..……………………30 Introduction Main Features GHz TechnologyOther features Compander Plus Noise ReductionGetting Started Checking package contentsModular jack Connecting the base unit Choosing a location for the base unit and handset cradleConnecting the handset cradle Batteries Charging the handset batteries Names and Controls HandsetBase unit Language Dial modeInitial Programming Handset nameKey tone Flash timeKey lock Handset ring toneAuto answer on / off Handset ring volume levelEarpiece volume level Tip To return to standby mode, pressClear message waiting Standby modeBasics Receiving a callReturning missed calls Correcting a dialing errorMaking a call Talk keyMute key C Low battery warningVoice mail indicator Handset locator page keyCaller ID list Caller ID FeaturesCaller ID with Call Waiting Reviewing Caller ID listStoring a name / number in the directory DirectoryDeleting entries from the Caller ID list Deleting the displayed entryKey Key of times pressed TipChanging a stored entry Making calls from the directoryDeleting an entry Storing caller ID entries in the directoryIdentifying a handset on the network MULTI-HANDSET ConfigurationRegistering a handset Intercom internal callIntercom ring tone Call togglingTransferring call between handsets Way conference callCall Waiting INT forCall back Changing the Handset BatteryBattery replacement and handling Display. Another party can answer the call by pressingHeadset Jack and Belt Clip Replacing the batteryRecycling NICKEL-METAL Hydride Batteries Headset connection headset not includedPower Failure LCD Screen MessagesLight Signals CHARGE/IN USE LED on the baseNo dial tone Sound SignalsTroubleshooting Dial tone is OK, but cannot dial outKeys do not work Handset does not ringCall was disconnected Phone beepsCannot dial out Cannot register handsetNo Caller ID display Maximize Battery Performance MaintenanceCaller ID error message Refresh battery Charge the battery for a full 15 continuous hoursKeep the contacts clean Do not replace the handset in the base after each callTechnical Information REN NumberSanyo Comfort Warranty Warranty ApplicationWhat is not Covered SOS Help Line Nationwide Customer Support