Sanyo LNS-W10 instruction manual Connecting the handset cradle Batteries

Page 7

GETTING STARTED

Connecting the handset cradle

Batteries

1.Open the battery compartment located at the back of the handset unit.

2.Plug the battery connector into the socket.

3.Replace the battery compartment by sliding it in the direction shown by the arrow in the diagram to the right. The lid clicks into place when it is secured.

Image 7

Contents Sanyo Canada Inc GHzTable of Contents Causes of Poor Reception ...………………..……………………30 Compander Plus Noise Reduction Main Features GHz TechnologyOther features IntroductionGetting Started Checking package contentsModular jack Choosing a location for the base unit and handset cradle Connecting the base unitConnecting the handset cradle Batteries Charging the handset batteries Handset Names and ControlsBase unit Handset name Dial modeInitial Programming LanguageHandset ring tone Flash timeKey lock Key toneTip To return to standby mode, press Handset ring volume levelEarpiece volume level Auto answer on / offReceiving a call Standby modeBasics Clear message waitingTalk key Correcting a dialing errorMaking a call Returning missed callsHandset locator page key Low battery warningVoice mail indicator Mute key CReviewing Caller ID list Caller ID FeaturesCaller ID with Call Waiting Caller ID listDeleting the displayed entry DirectoryDeleting entries from the Caller ID list Storing a name / number in the directoryTip Key Key of times pressedStoring caller ID entries in the directory Making calls from the directoryDeleting an entry Changing a stored entryIntercom internal call MULTI-HANDSET ConfigurationRegistering a handset Identifying a handset on the networkCall toggling Intercom ring toneINT for Way conference callCall Waiting Transferring call between handsetsDisplay. Another party can answer the call by pressing Changing the Handset BatteryBattery replacement and handling Call backHeadset connection headset not included Replacing the batteryRecycling NICKEL-METAL Hydride Batteries Headset Jack and Belt ClipLCD Screen Messages Power FailureCHARGE/IN USE LED on the base Light SignalsDial tone is OK, but cannot dial out Sound SignalsTroubleshooting No dial tonePhone beeps Handset does not ringCall was disconnected Keys do not workCannot dial out Cannot register handsetNo Caller ID display Maximize Battery Performance MaintenanceCaller ID error message Do not replace the handset in the base after each call Charge the battery for a full 15 continuous hoursKeep the contacts clean Refresh batteryREN Number Technical InformationWarranty Application Sanyo Comfort WarrantyWhat is not Covered Nationwide Customer Support SOS Help Line