Sanyo LNS-W10 Mute key C, Handset locator page key, Low battery warning, Voice mail indicator

BASICS

MUTE key “C”

To have a private, off-line conversation, use the mute feature. The caller on the other end of the line cannot hear you, but you will be able to hear them. To mute the microphone:

1.While a call is in progress, press C on the handset “MIC MUTE” will appear on the handset display.

2.Press C again to return to your phone conversation, “EXTERNAL CALL” will be shown on the handset display.

Handset locator (page key)

To locate a misplaced handset, press the PAGE key on the base unit. All handsets will beep and the screen shows “PAGING”. To end a page, do one of the following:

1.Press TALK or any key (0-9) * or # on the handset.

2.Press PAGE on the base unit.

Low battery warning

1.If the battery is low and the phone is in TALK mode, a warning tone consisting of 2 short beeps will sound from the handset earpiece every 15 seconds.

“CHARGE BATTERY” shows on screen.

2.If the battery is low and the phone is in STANDBY mode, a warning tone consisting of 2 short beeps will sound from the handset every 15 seconds, and “CHARGE BATTERY” shows on screen.

Voice mail indicator

When you subscribe to a voice mail service offered by your phone company, the phone alerts you when voice mail has been received. MESSAGE WAITING appears on screen when a voice mail is received. The LED (orange) on the base flashes slow to indicate there is a voice mail waiting. After the voice mail has been reviewed, you

can remove the message indicator. Please see the Clear message waiting section on page 14 for more information.

Note: The indicator does not work with your answering machine. The phone will only work with an FSK type of VMWI System. It will not work with the Stutter Dial Tone type of VMWI System.

16