Sanyo LNS-W10 instruction manual Light Signals, CHARGE/IN USE LED on the base

Page 27

UNKNOWN # / NAME /

Some or all of the Caller ID information was not

CALLER

sent with the call

FORWARD CALL

 

 

 

A call

has

been forwarded

 

 

DELETE?

Prompt asking you if you want to erase the

 

current Caller ID entry or a directory entry that

 

is shown on screen

DELETE ALL?

Prompt asking you if you want to erase all

 

Caller ID information

MESSAGE WAITING

Caller has left a message (you must subscribe

 

to voice mail service offered by your local

 

phone company for this to work)

STORE NUMBER

Prompt telling you to enter a telephone number

 

in the directory

STORE NAME

Prompt telling you to enter a name in the

 

directory

PHONEBOOK EMPTY

There is no record stored to the selected

 

directory location

CALL LOG EMPTY

There is no record stored to the selected call

 

log location

NO LINE

Telephone line is disconnected from base unit

 

 

KEY LOCKED

The keypad is locked

 

 

OUT OF SERVICE

When the handset is out of range or the base

 

unit power failure

CHARGE BATTERY

When the battery is low

 

 

PLACE IN CHARGER

The battery voltage is too low

 

 

RINGER OFF

The ringer is switched off

 

 

 

 

LIGHT SIGNALS

The charge/in use indicator will change under the following conditions.

CHARGE/IN USE LED on the base

27

Image 27
Contents Sanyo Canada Inc GHzTable of Contents Causes of Poor Reception ...………………..……………………30 Compander Plus Noise Reduction Main Features GHz TechnologyOther features IntroductionChecking package contents Getting StartedModular jack Choosing a location for the base unit and handset cradle Connecting the base unitConnecting the handset cradle Batteries Charging the handset batteries Handset Names and ControlsBase unit Handset name Dial modeInitial Programming LanguageHandset ring tone Flash timeKey lock Key toneTip To return to standby mode, press Handset ring volume levelEarpiece volume level Auto answer on / offReceiving a call Standby modeBasics Clear message waitingTalk key Correcting a dialing errorMaking a call Returning missed callsHandset locator page key Low battery warningVoice mail indicator Mute key CReviewing Caller ID list Caller ID FeaturesCaller ID with Call Waiting Caller ID listDeleting the displayed entry DirectoryDeleting entries from the Caller ID list Storing a name / number in the directoryTip Key Key of times pressedStoring caller ID entries in the directory Making calls from the directoryDeleting an entry Changing a stored entryIntercom internal call MULTI-HANDSET ConfigurationRegistering a handset Identifying a handset on the networkCall toggling Intercom ring toneINT for Way conference callCall Waiting Transferring call between handsetsDisplay. Another party can answer the call by pressing Changing the Handset BatteryBattery replacement and handling Call backHeadset connection headset not included Replacing the batteryRecycling NICKEL-METAL Hydride Batteries Headset Jack and Belt ClipLCD Screen Messages Power FailureCHARGE/IN USE LED on the base Light SignalsDial tone is OK, but cannot dial out Sound SignalsTroubleshooting No dial tonePhone beeps Handset does not ringCall was disconnected Keys do not workCannot register handset Cannot dial outNo Caller ID display Maintenance Maximize Battery PerformanceCaller ID error message Do not replace the handset in the base after each call Charge the battery for a full 15 continuous hoursKeep the contacts clean Refresh batteryREN Number Technical InformationWarranty Application Sanyo Comfort WarrantyWhat is not Covered Nationwide Customer Support SOS Help Line