VTech CS6428-2/CS6429/ CS6249-15/CS6429-16/ CS6429-2/CS6429-3/ CS6429-4/CS6429-5 Battery

Page 56

Appendix

Battery

It takes up to 10 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation

Operating time

While in handset use (talking*)

Up to seven hours

 

 

While in speakerphone mode (talking*)

Up to four hours

While not in use (standby**)

Up to five days

*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.

The battery needs charging when:

A new battery is installed in the handset.

The handset beeps.

A battery is properly installed and the screen is blank.

LOW BATTERY or PLACE IN CHARGER shows on the handset screen.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1(800) 595-9511. In Canada, go to www.vtechcanada.com or dial 1 (800) 267-7377.

Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.

Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

Exercise care in handling batteries in order not to create a short circuit with conductive materials.

Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Observe proper polarity orientation between the battery and metallic contacts.

To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

52

Image 56
Contents Complete user’s manual Congratulations Table of contents Answering system settings Answering system operationAppendix IndexParts checklist Getting startedTelephone base and charger installation Battery installation Charge light remains on when charging If you do not hear a dial toneBattery charging Battery indicators Battery status ActionLOW Battery ChargerInstallation options Tabletop to wall mount installationWall mount to tabletop installation See Telephone base and charger installation onRewiring of telephone line for cable/VoIP service users Telephone base layout Message windowUSE light VOL and /VOLFlash Handset layoutCharge light MENU/SELECT Dialing keysTelephone settings Using the menuRinger volume telephone base SettingRinger volume handset Ringer toneLCD language To choose English , Français orKey tone Clear voicemail indicatorsTo manually turn off these indicators Set date and time Dial mode Home area codeTelephone operation Mute Call waitingTemporary ringer silencing Temporary tone dialingRedial list Review and dial a redial entryStore a number from the redial list to the directory Delete a redial entryTo access the directory while on a call To access the call log while on a callTo access the redial list while on a call Chain dialingJoin a call in progress Find handsetTo join a call To start the paging toneOther Handset is Calling when you have two IntercomCall transfer using intercom Answer an incoming call during an intercom callFrom this intercom call, you have the following options Directory About the directoryCreate a new directory entry Edit Number Review the directory Alphabetical searchDial a directory entry Edit a directory entrySpeed dial Store a speed dial entryDial a speed dial number Delete a speed dial entryInformation about caller ID with call waiting Caller IDAbout caller ID Call log Not Available AT this TimeReview and dial from the call log Missed call indicatorMemory match View dialing options Save a call Iog entry to the directoryDelete from the call log Call log display screen messagesTo delete one entry To delete all entriesAnswering system settings Answering system setupAnswer on/off AnnouncementRecord a new announcement Play the announcementDelete your announcement Press MENU/SELECT to select AnnouncementRemote access code Call screeningNumber of rings Press MENU/SELECT to select Call ScreeningMessage alert tone Recording timeAnswering system operation Answering system and voicemail indicatorsUsing the answering machine and voicemail together Voice prompts Message capacityAnswering system new message indication Call screening at the telephone baseMessage playback Call screening at the handsetCall intercept To play messages with the telephone base To play messages with a handsetTo delete all old messages with a handset Delete all old messagesTo delete all old messages with the telephone base Record, play or delete memos Press 5 to stop recording. The system announces, RecordedMessage window displays Window display DescriptionCommand Remote accessTo remotely access the answering system Appendix Handset display screen messagesTelephone number you have entered is already stored Handset and telephone base indicators On when the handset speakerphone is in useHandset lights Telephone base lightsBattery Battery needs charging whenTo register a handset Expand your telephone systemAdd and register a handset optional Replace a handset To deregister all handsetsTroubleshooting My telephone does not work at allThere is no dial tone Cannot dial outLOW Battery shows on the handset screen Charge light is offTelephone does not ring when there is an incoming call My handset beeps and is not performing normallyHear other calls when using the telephone Hear noise on the cordless handset and the keys do not workCaller ID entries do not match the numbers I need to dial My caller ID features are not working properlyRegistration Failed appears on the handset Cannot retrieve voicemail messages OUT of Range or no PWR AT Base shows in the handset screenNEW Voicemail and show on the display and I don’t know why Answering system does not respond to remote commands Outgoing announcement is not clearAnswering system does not record messages Messages on the answering system are very difficult to hearCommon cure for electronic equipment Important safety instructions Pacemaker patients Precautions for users of implanted cardiac pacemakersOperating range Maintenance Avoid rough treatmentAbout cordless telephones Rbrc sealLimited warranty What does this limited warranty cover?How long is the limited warranty period? What is not covered by this limited warranty?How do you get warranty service? Other limitationsFCC Part 68 and Acta FCC, Acta and IC regulationsFCC Part Industry Canada Technical specifications Index Index All rights reserved. Version 7 09/12