VTech DS6221-4, DS221-2, DS221-3, DS6221-5, DS6222-4, DS6222-5 user manual Battery

Page 41

Appendix

Battery

It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:

Operation	Operating time

While in handset use (talking*)	Up to eight hours

While in speakerphone mode (talking*)	Up to five hours

While not in use (standby**)	Up to six days

*Operating times vary depending on your actual use and the age of the battery. **Handset is not charging or in use.

The battery needs charging when:

•A new battery is installed in the handset.

•The handset beeps.

•A battery is properly installed and the screen is blank.

•LOW BATTERY or PLACE IN CHARGER shows on the handset screen.

CAUTION:

To reduce the risk of fire or injury, read and follow these instructions:

•Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.

•Do not dispose of the battery(ies) in a fire. Check with local waste management codes for special disposal instructions.

•Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.

•Exercise care in handling batteries in order not to create a short circuit with conductive materials.

•Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

•Observe proper polarity orientation between the battery and metallic contacts.

•To prevent fire or shock hazard, do not expose this product to water or any type of moisture.

37

Image 41

Contents User’s manual Congratulations Table of contents Index AppendixGetting started Parts checklistTelephone base and charger installation Place in Charger Battery installation and chargingTabletop to wall mount installation Installation optionsSee Telephone base and charger installation on Wall mount to tabletop installationCharge light Handset layoutDelete Telephone base layoutRinger volume handset Telephone settingsRinger tone Key toneSet date/time LCD languageHome area code Clear voicemailAnswering system set up Answering system settingsNumber of rings Remote codePlay your announcement AnnouncementRecord your own announcement Delete your announcementTelephone operation Ringer mute MuteCall waiting Find handsetChain dialing To access a number in the directory while on a callTo access a number in the call log while on a call Intercom Multiple handset useAnswer an incoming call during an intercom call Handset 11, and *2 for HandsetShows Handset X is Calling Share an outside callScreen shows Calling Other HANDSET. Directory Shows Enter Name Store a directory entryNumber Character chartDial a directory entry Search the directoryAlphabetical search Shows Edit Number Edit a directory entryDelete from the directory About caller ID Call log Missed calls indicatorMake a call log entry ready to dial Review the call logDelete from the call log Dial a call log entrySave a call log entry to the directory Redial list Call log display screen messagesDial a redial entry Delete from redialMessage capacity Answering system operationAnswering system and voicemail Turn the answering system on or off Telephone base ringer volumeCall screening Call interceptMessage playback New message indicationTo play messages with the telephone base To play messages with a handsetRecord and play memos Delete all messagesRecord a memo To delete all messages with the telephone baseWindow display Description Message window displaysCommand Remote accessHandset display screen messages AppendixThere is no telephone line connected Battery indicator Handset and telephone base indicators Handset lightsTelephone base lights Handset iconsBattery Add and register a handset optional Expand your telephone systemReplace a handset My telephone does not work at all TroubleshootingLow Battery shows on screen There is no dial tone Telephone does not ring when there is an incoming callCharge light is off My handset beeps and is not performing normally Cannot dial outHear noise on the cordless handset and the keys do not work Hear other calls when using the telephoneMy caller ID features are not working properly Outgoing announcement is not clear CONNECTING... shows in the handset screenCaller ID entries do not match the numbers I need to dial Messages on the answering system are very difficult to hear Answering system does not respond to remote commandsAnswering system does not record messages Messages on the answering system are incompleteImportant safety instructions Operating range MaintenanceRbrc seal About cordless telephonesWhat does this limited warranty cover? WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Technical specifications Index Index 91-002292-020-100