Cisco Systems EGW 2200 manual Integration Tasks, Task List to Create the Integration

Page 1

QSIG/DPNSS Phone System with

Cisco EGW 2200 Integration Guide for

Cisco Unity Connection 1.1

Published November 22, 2005

This document provides instructions for integrating a QSIG/DPNSS phone system with Cisco Unity Connection through a Cisco EGW 2200.

Integration Tasks

Before doing the following tasks to integrate Cisco Unity Connection with a QSIG/DPNSS phone system through a Cisco EGW 2200, confirm that the Cisco Unity Connection server is ready for the integration by completing the appropriate tasks in the Cisco Unity Connection Installation Guide.

The following task lists describe the process for creating, changing, and deleting integrations.

Task List to Create the Integration

Use the following task list to set up a new integration with a QSIG/DPNSS phone system. If you are installing a new Cisco Unity Connection server by using the Cisco Unity Connection Installation Guide, you may have already completed some of the following tasks.

1.Review the system and equipment requirements to confirm that all phone system and Cisco Unity Connection server requirements have been met. See the “Requirements” section on page 2.

2.Plan how the voice messaging ports will be used by Cisco Unity Connection. See the “Planning How the Voice Messaging Ports Will Be Used by Cisco Unity Connection” section on page 4.

3.Program the QSIG/DPNSS phone system. See the “Programming the QSIG/DPNSS Phone System” section on page 5.

4.Set up the Cisco EGW 2200. See the “Setting Up the Cisco EGW 2200” section on page 6.

5.Create the integration. See the “Creating a New Integration with the QSIG/DPNSS Phone System” section on page 6.

Corporate Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

© 2005 Cisco Systems, Inc. All rights reserved.

Image 1

Contents Task List to Create the Integration Integration TasksIntegration Description RequirementsTask List to Make Changes to an Integration Task List to Delete an Existing IntegrationCall Information Integration FeaturesIntegrations with Multiple Phone Systems Number of Voice Messaging Ports to InstallField Considerations Number of Voice Messaging Ports That Will Answer Calls Programming the QSIG/DPNSS Phone SystemNumber of Voice Messaging Ports That Will Dial Out Field Setting Setting Up the Cisco EGWTo Create an Integration Settings for the Cisco EGW 2220 or SIP Proxy Server Settings for the Phone System Trunk To Set Up the Test Configuration Testing the IntegrationOn the Edit menu, click Message Waiting Indicators Uncheck the Set for Self-enrollment at Next Login check boxTest User To Test Listening to Messages To Test an External Call with Release TransferTo Test Supervised Transfer To Set Up Supervised Transfer on Cisco Unity ConnectionTo Delete the Test User Click Delete SelectedTo Change the Settings for an Integration Changing the Settings for an Existing IntegrationPhone System Port Group To Delete an Existing Phone System Integration Deleting an Existing Phone System IntegrationReasons to Use Alternate Extensions Alternate ExtensionsHow Alternate Extensions Work To Add Administrator-Defined Alternate Extensions Setting Up Alternate ExtensionsAlternate MWIs Setting Up Alternate MWIsTo Modify Alternate Extensions To Delete Alternate ExtensionsTo Modify Alternate MWIs To Delete Alternate MWIs ConventionsConvention Description Ctrl-Alt-DeleteCisco.com Obtaining DocumentationPanel Phone and Modem Options AdvancedProduct Documentation DVD Documentation FeedbackOrdering Documentation Cisco Product Security Overview Reporting Security Problems in Cisco ProductsObtaining Technical Assistance Submitting a Service RequestCisco Technical Support & Documentation Website Obtaining Additional Publications and Information Definitions of Service Request SeverityPage OL-8187-01