BASIC OPERATION
BASIC OPERATION
RECORDING INCOMING MESSAGES
The maximum incoming message recording length is 60 seconds. When a recording reaches 55 seconds, the DTAM beeps once to notify the caller that time will soon be up. When the recording reaches 60 seconds, the DTAM sounds one long and four short beeps, and plays "Thank you for your call", then hangs up.
The DTAM hangs up and resets to answer the next call when:
•The caller hangs up.
•The maximum message length (60 seconds) is reached.
•There are more than 8 seconds of silence.
If the DTAM’s memory is full (
appears), it will answer the call after 3 rings then play the announcement only message (OGM2).
If no OGM2 is recorded, the DTAM announces "Memory is full, thank you for your call". Please delete some messages to restore normal operation.
SCREENING CALLS
To screen calls, let the DTAM answer them, then listen to the caller’s message through the DTAM’ speaker. If you decide to
answer the call, pick up the phone and press 
on the DTAM.
If you do not want to take the call, do not pick up the phone, and let the DTAM finish recording the caller’s message.
26