Nortel Networks SL-100 manual Call Center headset interface, Freeing your hands while on the job

Page 32
Volume Control with Amplified Headset.
Headset Options Feature.
Headset, Handset, and Supervisor Jacks.

Call Center headset interface

Call Center headset interface

The M3905 is compatible with most headsets.

Freeing your hands while on the job

The Headset Key controls a headset that is connected to the headset jack. The Headset Key is a Fixed Feature Key on the lower left of the phone. The headset jack is on the back of the M3905 telephone set. Both direct connect, or unamplified headsets, and amplified headsets can be used with the M3905 headset jack.

The headset and handset jacks

are located on the back of the M3905 telephone set. The jack on the side of the M3905 telephone set is the Supervisor jack that is used in conjunction with the Supervisor Observe Key.

Switching between the handset and the headset

If you use a headset, the M3905 has a Headset Key to turn the headset on and off. The Headset Key is used to switch between the headset and the handset mode of operation. The LED lights steady to indicate that you are in headset mode.

If you have the handset option installed, press the Headset Key to enter handset mode. The Headset Key LED goes off, and all calls are presented to the handset. Lift the handset and press a DN or In-CallsKey to receive calls. To make outgoing calls with your handset, lift the handset and press an Individual DN key to receive dial tone. If you wish to return to headset mode, press the Headset Key. The Headset Key LED will go on, and all calls will be presented to the headset.

There are three settings provided for the headset

connection. Use the Options feature to choose Type 1, Type 2, or Amplified to adjust the gain that works best with the type of headset that you are using. For an amplified headset, choose the Amplified Headset setting in the Options list.

To control the volume, use the

volume control bar on the telephone and the switch on the amplified headset. Adjust the telephone volume before adjusting the headset volume. To provide the best communication with the least amount of distortion, the amplifier should have a higher setting than the telephone volume control.

Volume Control with Direct Connect, or Unamplified Headset. To

control the volume, use the volume control bar on the telephone or adjust the volume setting in the Options Menu.

Note: Refer to your distributor for the latest product bulletin from Nortel Networks recommending headset types for use with the M3905 Call Center Telephone.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Meridian Digital Telephones Page Introduction to your M3905 Call Center Telephone Call Center headset interface Your telephone non-ACD call features Make a Call Incoming calls Feature Key chart Meridian SL-100 Feature Access Codes FAC Table of contents Introduction to your M3905 Call Center Telephone M3905 Call Center TelephoneM3905 Call Center Features Optional accessoriesAvailable ACD Features on the M3905 Telephone Introduction to your M3905 Call Center Telephone Terms you should know Terms you should know Programmable Line/Feature Keys self-labeled Your telephone’s controlsContext Sensitive Soft Keys self-labeled Call Processing KeysApps X2498Mute Key Volume Control Bar Fixed KeysHeadset Key Emergency Key Not Ready Key Application Keys DsplyQueueMessage Key Primary Directory NumberIndividual Directory Number M3905 Call Center Meridian Digital Telephone Your telephone display informationM3905 Display Aug 20 548 PSelect Options ListOptions Select AutoDial Change a Feature Key labelSelect a language Select Purchasing Lower Higher Adjust Screen contrastAdjust volume Play Select Choose Ring typeSelect Call Log options Area code set up Live dial padPreferred name match OffCall timer Date/time formatKey click Key to turn on Key click, or pressHeadset type Headset port on callDisplay diagnostics Headset port external alerterFreeing your hands while on the job Switching between the handset and the headsetCall Center headset interface Agent Login Enhancement Call Center agent/supervisor featuresAgent Login Agent Logout Agent features Activity Code Fixed Key to activate Line-of-Business codeAnswer Call Center Calls LOBCodeCall Forcing Multistage Queue Status Key/LampDisplay Queue Threshold Msqs enhancement for agents Display QueCallq 5551234 T2 Callq Forward Callers RedialEmergency Key Make BusyNot Ready Key 2498 Answer or Make Non-ACD CallsContact your supervisor Walkaway and Return from Walkaway Transfer to InCalls Key Answer Agent Call Center supervisor featuresAgent Keys Answer Emergency Call AgentUse Supervisor Observe and the Supervisor Headset Jack Agent1Night Service Controlled InterflowConIntrFlw NightSvcObserve Agent Agent1 orDisplay Agent Status DisplayAgtDisplay Queue Status Dsply QueueYour telephone non-ACD call features Make a CallPredial feature Auto Dial2637 2498 PurchasingRingAgn Redial Last Number CalledActivate Ring Again Speed Call RngCallCanclRA SpcCtrlSystem Speed Call Network Speed Call DoneSpcCtrl SpcUsr 2498 SSCuser SScCtlrGpintercom Intercom CallGroup Intercom All Call Intercom Call on a Predesignated Set IntercomAnswer a Call Individual Page from Group IntercomWhile you are away from your desk Call ForwardForward Done CheckFw DoneCheckFw CanclFwCall Forward Remote Activation While on an active call Place a call on HoldTransfer a Call TransBlind Transfer Recall Swap ConnectCall Park 2498 TransPark DirectPark2498 DirectPark Charge a Call or Charge a Forced Call Inspect KeyTrace a Malicious Call InspectMALCSHold 2498 MALCSHold key TransIncoming calls Answer Call PickupPickup DNPickupCall Waiting Call WaitConf Swap Connect Set up a conference callTalk with more than one person 2270 Preset ConferenceCall Join Call features Use Privacy ReleasePaging PrivRlsExeBusyOvd Busy OverrideMake an Announcement over the Call Use Station Camp-on Class features on IVD sets Anonymous Caller Rejection AcrjAutomatic Callback ACB 2698Automatic Recall AR Customer Originated Trace COT Calling Name/Number Delivery Blocking Cnnb 2698 CustOrigTrSelective Call Forward SCF Directory display and navigation Dir/LogDirectory password protection Callers RedialEnter DonePassword enabled on Access and use the Callers List Call LogSelect New Old CallersAccess and use the Redial List DialRedial Access the Personal Directory Use the Personal DirectoryAdd a Personal Directory entry AddNewÀàà Àààà Next DoneAdd an incoming call Dir/Log Next Clear DoneAdd an outgoing call Delete or edit a Personal Directory entryNext Done DeleteDelete your Personal Directory YesEdit Next Done DelList Yes NoUse the Personal Directory to make a call Use Card ViewSearch for an entry Copy a number from the Redial List Dir/Log NextSelect Done Corporate DirectoryApps NewFind Resume Dirctry Accessories for the M3905 Key-based Access Expansion Module KBA Display-based Access Expansion Module DBAAnalog Terminal Adapter ATA External Alerter and Recorder InterfaceFeature Key chart 100 101 102 Meridian SL-100 Feature Access Codes FAC Acrj104 105 Key 24 107 Index 108 Page Internal Manufacturing part number P0943524 Issue

SL-100 specifications

Nortel Networks SL-100 is a sophisticated telecommunications platform renowned for its versatility and robust features. Introduced in the late 1990s, this digital switching system caters primarily to small and medium-sized enterprises (SMEs), providing them with advanced telephony capabilities that were once limited to larger organizations.

At the heart of the SL-100 is its ability to support both traditional circuit-switched telephony and emerging VoIP technologies. This dual capability allows businesses to transition seamlessly from legacy systems to modern communication frameworks, ensuring that they can leverage both existing infrastructure and new innovations. The platform is designed to scale, accommodating a range of up to 2,000 lines, making it an appropriate solution for companies anticipating growth.

One of the standout characteristics of the SL-100 is its modular architecture. This design enables organizations to customize their systems with various modules tailored to specific needs. Options such as voicemail, call center features, and enhanced reporting capabilities can be integrated without necessitating a complete system overhaul. As a result, businesses can implement only the features they require, optimizing cost and efficiency.

Nortel’s SL-100 employs a centralized management interface that simplifies administration and improves operational efficiency. This interface provides system administrators with real-time monitoring and the ability to manage user accounts and features from a single point. The platform also facilitates easier troubleshooting and maintenance, reducing downtime and operational disruption.

Security is another essential feature of the SL-100. It incorporates user authentication, call encryption, and network security measures to protect sensitive communications. As cyber threats become increasingly prevalent, the SL-100 positions itself as a reliable option for businesses concerned about maintaining secure communications.

Additionally, the Nortel SL-100 supports various standard protocols, enhancing interoperability with third-party applications and equipment. This crucial compatibility improves its attractiveness to organizations seeking to integrate their legacy systems with modern solutions like customer relationship management (CRM) and other enterprise applications.

Overall, Nortel Networks SL-100 stands out as a dynamic telecommunications solution, balancing advanced technology, flexibility, and security. As businesses navigate an ever-evolving communications landscape, the SL-100 offers a pathway for companies to modernize their communication infrastructure while maintaining the functionality and integrity of their existing systems.
Top Page Image Contents