86Changing the Caller’s Record Display Setting
When the Dialing Rule Setting is enabled, Enterprise Edge Personal Call Manager uses dialing properties, such as the local area code and the outside line access code, when making a call. When the Dialing Rule Setting is disabled, Enterprise Edge Personal Call Manager does not use the dialing properties and you must manually enter any additional dialing information, such as the outside line access code.
To change the Dialing Rule Setting from the Menu bar:
1.Click the Tools menu and then click Options. The Options dialog box appears.
2.Click the Use Rules defined in the Dialing Property Dialog check box to change the setting.
To change the Dialing Rule Setting from the task tray:
1.
The Options dialog box appears.
2.Click the Use Rules defined in the Dialing Property Dialog check box to change the setting.
Changing the Caller’s Record Display Setting
When the Caller’s Record Display Setting is on, Enterprise Edge Personal Call Manager compares the incoming telephone number to the entries in the Address Book. If a match is found, the Notes tab of the Address Properties dialog box appears showing the information for the caller. If a match is not found, a message appears asking if you want to add the caller to the Address Book.
Enterprise Edge Personal Call Manager User Guide | P0908542 Issue 01 |