Accessing the Voice Mail System
Accessing the Voice Mail System
Calling the Voice Mail System for the First Time
1.Lift the handset (or use handsfree dialing).
2.Dial the Message Center extension. The system prompts you for your passcode.
3.Enter your default passcode.
4.Press 
.The system prompts you for a new passcode (you must change the passcode).
5.Enter your new passcode.Your new passcode must have the same number of digits as the
default passcode. You cannot 
or 
in your new passcode.
6.The system asks you to
7.The system asks you to record your name. Say only your name, for example: “Christine Conner”. Speak immediately after the tone, and press any key when you have finished.
8.Press 
to accept, 
to review, or 
to discard your name and
9.The system prompts you for a greeting. Keep your greeting short and professional. For example:
“You have reached Christine Conner. I can't answer the phone right now, so please leave your name, number, and a short message – I will get back to you as soon as possible. If you need immediate assistance, press 0 and ask to be transferred to my associate, Julie Jones.”
Note: Your administrator may have programmed your mailbox to play a standard company
10.To end the recording, press any key. The system plays back your greeting. Press 
to
accept it, 
to review it, or 
to discard and
11.If you want to define your Personal Contact numbers now, press 
and continue with step 12 below. If not, press any other key and got to step 15.
12.Enter the number for your cellular telephone using the keypad, or press 
to skip to the next step.
After you have entered the number, the system reads it back to you. Press 
to accept the number, 
to review it, or 
to discard and
13.Enter the number for your pager using the keypad, or press 
to skip to the next step.
After you have entered the number, the system reads it back to you. Press 
to accept the number, 
to review it, or 
to discard and
14.Enter the number for your fax using the keypad, or press 
to skip to the next step.
9