Using the Basic Features of Your SoundPoint IP 330/320 Phone
Static Forwarding
To enable call forwarding to another party:
1.Press and select Features > Forward.
2.(Optional) If multiple lines are configured on your phone, select the line
to forward from the list using and .
3.Using and , select the forwarding type you want to change and
then press . The options are:
—
—No
—
4.Depending on your selection:
a If you select Always, enter a number to forward all future incoming calls to.
b If you select No Answer, enter a number to forward all unanswered incoming calls to and how many rings to wait before forwarding (one ring is approximately six seconds). A value of 2 is recommended.
c If you select Busy, enter a number to forward all future incoming calls to when you are already in another call.
Note | You can also enter the SIP URL or IP address. For more information on using a SIP |
| URL or IP address, refer to To place a call using the handset:: on page |
|
|
5.Select the Enable soft key to confirm call forwarding. Select the Exit soft key to cancel any changes.
The idle display returns with a moving arrow as the line label to confirm call forwarding is enabled.
3 - 13