Nortel Networks NN43117-110 01.01 Additional features and controls, Enter text using the dialpad

Additional features and controls

Additional features and controls

Enter text using the dialpad

You can use the dialpad to enter text when you use features.

For example, if you want to use the letter “A”, press the number 2 key once. If you want the letter “C”, press the number 2 key three times.

Note: No letters are associated with the number 1 or the 0 keys.

Use the Symbol key to enter special characters

When entering text into a directory name, surname etc. you will see a “flashing cursor” on the information line above the bottom soft keys.

At this point you can press one of the keys on the dialpad. The following list shows what each keypad press will display:

Key 1 - Nothing

Key 2 - AÀÁÂÃÄÅÆBCÇaàáâãäåæbcç2

Key 3 - DEÈÉÊËFdeèéêëf3

Key 4 - GHIÌÍÎÏghiìíîï4

Key 5 - JKLjkl5

Key 6 - MNÑOÒÓÔÕÖØmnñoòóôõöø6

Key 7 - PQRSpqrs7

Key 8 - TUÙÚÛÜVtuùúûüv8

Key 9 - WXYÝÞßZwxyýþÿz9

Key # - !"#$%&'()*+,-./0123456

For example, if you press Key 2, the letter “A” will replace the flashing cursor for approximately four seconds. The Symbol key will appear as the third soft key from the left.

79