21
Installation preparation
This section provides basic information about the Nortel Secure Network Access Switch (NSNA) 4070 and the checklist of the shipped accessories.
Navigation
•"Safety precautions" (page 21)
•"Installation checklist" (page 23)
Safety precautions
This section describes the safety precautions, which are vital for handling and installation of the NSNA.
Safety precautions navigation
•"Personal safety before installing the device" (page 21)
•"Module safety" (page 21)
•"Cable and connector safety" (page 22)
Personal safety before installing the device
For your safety, review the following personal safety warnings before working with the NSNA.
•Two or more people must be involved in installing the device.
•Use the following safe practices for lifting:
—Items between 18 and 32 kilograms (39.7 and 70.5 pounds) should be lifted by a minimum of two people.
Module safety
Use the following general practices to prevent the equipment damage when working with the NSNA.
•The device must be installed in a room where the ambient temperature is at or below 35 degrees Celsius (95 degrees Fahrenheit).
Nortel Secure Network Access
Installation — Quick Start Switch 4070
2.0 28 July 2008
Copyright © 2008, Nortel Networks