34Configuration
3To initiate the system connection process, press ENTER on the terminal.
4At the login prompt, log in as user: admin.
5At the password prompt, enter the administrator password. The default administrator password is admin.
ATTENTION
To ensure continuing system security, change the default password to the password of your choice after you successfully configure the switch.
6After password verification, when the device is booted for the first time, the Setup menu is displayed. Use the new command to begin cluster creation.
[Setup Menu]
join - Join an existing iSD cluster
new - Initialize host as a new installation boot - Boot menu
info - Information menu
exit - Exit [global command, always available] >> Setup# new
Setup will guide you through the initial configurati on.
7Specify the network connectivity port.
Enter port number for the management interface
ATTENTION
The Nortel SNAS 4070 has two ports for the management interface.
This port is assigned to Interface 1.
8Specify the host IP address.
Enter IP address for this machine (on management interface):
The IP address must be unique and within the same address range as the Management IP address. The host IP address is assigned to Interface 1.
9Enter network mask.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
2.0 28 July 2008
Copyright © 2008, Nortel Networks