28Installation
3Extend the slide rails fully from the server rack until they lock. Align the tabs on the slide rails with the matching inserts on the device (1) and lower the server onto the slide rails.
Ensure that each slide rail tab is inserted in the matching insert on the server and that the server is resting on the top edge of the slide rail.
4Carefully slide the device along the slide rails approximately 2.54 centimeters (1 inch) toward the server rack to lock the device on the slide rails. When the device is locked in position, an indicator (1) is visible on each side of the device. Ensure that the device is securely attached to the slide rail hooks (2).
To remove the device from the rack, lift up on the indicator and slide the server forward.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
2.0 28 July 2008
Copyright © 2008, Nortel Networks