Installing an NSNA device into a rack 29
5Lift the locking levers (1) on the slide rails and slide the device into the server rack until it extends approximately 10.16 centimeters (4 inches) from the rack.
6Slide the device into the server rack cabinet until the release latches (1) lock into place. To slide the device out of the rack, press on the release latches.
Insert the included, optional M6 screws in the front and rear of the device (2) if moving the server rack or the rack is installed in a vibration prone area.
Nortel Secure Network Access
Installation — Quick Start Switch 4070
2.0 28 July 2008
Copyright © 2008, Nortel Networks