BT RESPONSE75 manual Insert the back-up battery, Please note

Page 8

Response 75 – Edition 7 – 26th October ’00 – 3370

4Insert the back-up battery

Before inserting the back-up battery you must ensure that your unit is connected to the mains power.

The back-up battery (9V alkaline not supplied) ensures that all settings and messages are saved for up to six hours in the event of a power cut.

If the back-up battery runs out, or no battery is fitted, then in the event of a power failure your Response 75 will revert to its original settings and messages will be lost.

If the battery is low the “Battery Low” light will come on.

Insert a 9V alkaline battery into the battery compartment.

BATTERY

Please note

Your Response 75 Plus battery low light, located beside the display, indicates back-up battery strength.

The LED will light up when the battery is low. It also remains lit when no back-up battery is inserted.

5Plug your Response 75 into the telephone socket

6You can now plug your telephone line cord into your Response 75

You will now be able to use your telephone as normal.

Your Response 75 is now ready to use.

6

Image 8

Contents User Guide Response 75 Edition 7 26th October ’00 At a glance OGMKey features This guide See ‘Remote Access’, IntroductionFor your records Unpacking your ResponseSetting up Plug the mains power cord into the back of the machinePlug the adaptor into a mains power socket Plan the location of your ResponseInsert the back-up battery Please noteWall mounting your Response Safety instructions General EnvironmentalUsing your Response To adjust the loudspeaker volumeTo set the answering machine to Answer Only mode Answer offTo set the time To set the time and dayTo check the time Outgoing message To record your own outgoing messageTo set the answer delay Select the Answer mode in which you want to check your OGMTo check your outgoing MessageTo receive incoming messages To check the answer delay settingReceiving messages Audible message alert To record a memoTo playback messages and memos You have X messagesTo delete all messages VIP feature To switch VIP on and offTo delete individual messages Call screeningTo check the VIP code and setting FeatureTo switch the feature on/off To allow VIP callers to alert youTo cancel any procedure To turn your Response 75 on Remote accessTo operate your Response 75 remotely Menu for remote access To stop/cancel a commandTo skip forwards to the next message To repeat current messageTo switch your answering machine on/off To pause a messageTo change your outgoing message To check your outgoing messageHelp TouchToneTM keypad Guide to the display ResponseIf you have to return your Response GuaranteeGeneral information Switchboard compatibility Feature will not work on a switchboardTechnical information Connection informationIf the power fails Wall mounting template Response 75 Edition 7 26th October ’00 Index VIPOffices worldwide