BT 400 Plus Back of the telephone, Plug the mains adaptor into the wall socket and switch on

Page 10

Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ 5290

4 Check Dial Mode setting (default TB)

5

Plug the mains adaptor cord into the

back of the telephone

 

 

Use the dialling mode switch on the underside of your Paragon 400 Plus.

Your Paragon 400 Plus should be pre-set to TB which gives you Tone dialling. This ensures the phone will work with all modern digital exchanges.

P

T

TB

MODE

HANDSET

If you do not get a dialling tone, try setting the dialling mode to P.

If you are connecting to a switchboard, check with your switchboard operator or communications manager which dialling mode you need. Your Paragon 400 Plus is approved for all compatible switchboards.

9V DC

LINE

6Plug the mains adaptor into the wall socket and switch on

The Paragon 400 Plus automatically goes through a start up process during which the display shows INITIALISING and the monitor light flashes.

On completion the unit display will show the time and number of messages.

SETTING UP

Note

For most switchboards the switch should be

set to T.

7

Image 10
Contents User Guide Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ At a glance 7 I I I 02 2 9 3Default to TB Using the answering machine This guideUnpacking your Paragon 400 Plus Enter your Remote access PIN hereIntroduction For your recordsSafety Setting upPlan the location of your Paragon 400 Plus Connect handset cord to base Insert back-up batteryConnect the telephone line cord Plug the mains adaptor into the wall socket and switch on Back of the telephoneFit plinth for desk mounting and track cables Wall-mounting your Paragon 400 PlusTo set the day and time Prompt says Please enter the dayUsing the Inductive coupler Using the telephoneMaking and ending calls To delete a number in the redial list Using the quickdial memoryTo adjust the earpiece volume To store a quickdial numberTo delete/change a quickdial number Two way recordingTo record your conversation Using the Mailboxes Using the answering machineSelecting the answering machine mode To Switch the Answering Machine On & OffTo use the pre-recorded outgoing message and announcement To record your own outgoing message OGMPlease speak after the tone To record a memo directly into Mailbox 2 orTo privately playback your messages through the handset Message and Ring indicatorTo playback your messages To delete all messagesTo use Call screening answering machine volume To adjust the playback volumeTo switch on Caller return To use Caller return AutoChanging the VIP code Using VIPTo turn VIP on and off Incoming calls when the VIP is switched on To set your PIN Using Remote accessTo switch on your answering machine To play back messages To play back messages from the two extra mailboxesTo adjust the ringer volume Optional SettingsTo adjust the number of rings before Your answering machine takes a callTo adjust the display contrast Help Help and advice0870 240 Guarantee General informationTechnical information BT Accessories Replacement ItemsSwitchboard compatibility TTE DirectiveWall-mounting template Index VIPOffices worldwide