BT manual Fit plinth for desk mounting and track cables, Wall-mounting your Paragon 400 Plus

Page 11

Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ 5290

7Fit plinth for desk mounting and track cables

If you use your Paragon 400 Plus as a desk phone you will need to fit the stand on to the base.

Ensure all the cables on the underside of the base are in their respective channels.

8Wall-mounting your Paragon 400 Plus

1 Turn around the handset clip to prevent the handset from falling when the product is wall-mounted.

WALLDESK

SETTING UP

Proceed by holding the stand as shown in the illustration, ensuring the two arrows are facing each other.

Now lower the stand so that the two lugs nearest to you, fit into the corresponding holes on base, as shown.

Push and squeeze until the stand clicks into place from front and back as shown in the inset.

2Use the template on page 25 to drill holes in the wall. Leave a small gap between the screw heads and the wall.

ARROWS

WALL PLUG SCREW

WALL

3Place your Paragon 400 Plus over the screw heads and slide down.

Image 11

Contents User Guide Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ 7 I I I 02 2 9 3 At a glanceDefault to TB This guide Using the answering machineFor your records Enter your Remote access PIN hereIntroduction Unpacking your Paragon 400 PlusPlan the location of your Paragon 400 Plus Setting upSafety Connect the telephone line cord Insert back-up batteryConnect handset cord to base Back of the telephone Plug the mains adaptor into the wall socket and switch onWall-mounting your Paragon 400 Plus Fit plinth for desk mounting and track cablesPrompt says Please enter the day To set the day and timeMaking and ending calls Using the telephoneUsing the Inductive coupler To store a quickdial number Using the quickdial memoryTo adjust the earpiece volume To delete a number in the redial listTo record your conversation Two way recordingTo delete/change a quickdial number To Switch the Answering Machine On & Off Using the answering machineSelecting the answering machine mode Using the MailboxesTo record your own outgoing message OGM To use the pre-recorded outgoing message and announcementTo record a memo directly into Mailbox 2 or Please speak after the toneTo delete all messages Message and Ring indicatorTo playback your messages To privately playback your messages through the handsetTo use Caller return Auto To adjust the playback volumeTo switch on Caller return To use Call screening answering machine volumeTo turn VIP on and off Using VIPChanging the VIP code To switch on your answering machine Using Remote accessIncoming calls when the VIP is switched on To set your PIN To play back messages from the two extra mailboxes To play back messagesYour answering machine takes a call Optional SettingsTo adjust the number of rings before To adjust the ringer volumeTo adjust the display contrast 0870 240 Help and adviceHelp General information GuaranteeTTE Directive BT Accessories Replacement ItemsSwitchboard compatibility Technical informationWall-mounting template VIP IndexOfﬁces worldwide