AT&T 955 Set Delay Ring, Turn Line Usage On or Off for Each Line, Turn Auto-Mute On or Off

Page 11

SET UP SYSTEM FEATURES

Set Delay Ring

NOTE: This feature is for use with Centrex systems only.

NOTE: If you choose to set a delayed ring on a phone with COVM service, the phone may not ring at all before COVM picks up the call.

1Press G.

2Press -until the screen displays DELAY RING, then press >.

3Press -or +to select the desired setting. (One ring is about six seconds.)

4Press Sto store your selection.

Turn Line Usage On or Off for Each Line

If you are not using all four phone lines, you need to turn off Line Usage for the unused lines. If you expand to a third or fourth line, turn Line Usage back on.

You may also restrict the use of certain lines on this phone to intercom and paging only, by turning off Line Usage for each line to be restricted. When Line Usage is turned off, that line cannot be used to answer incoming calls or to make outgoing or transfer calls.

1Press G.

2Press -until the screen displays LINE USAGE, then press >.

3Press -or +until the screen displays the desired line number, then press >.

4Press -or +to select the desired setting.

5Press Sto store your selection.

6Repeat Steps 1-5to change the Line Usage status for additional lines.

Assign the Prime Line (Line Preference)

1Press G.

2Press -until the screen displays PRIME LINE, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

SET UP SYSTEM FEATURES

Assign the Line Group for this Phone

1Press G.

2Press -until the screen displays LINE GROUP, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

Turn Auto-Mute On or Off

Choose whether sounds at this extension will be heard automatically in response to a page (Auto-Mute Off) or only when Mis pressed. Auto-Mute Off permits hands-free conversation and room monitoring; Auto-Mute On protects privacy.

1Press G.

2Press -until the screen displays AUTO MUTE, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

Set the Dial Mode

1Press G.

2Press -until the screen displays TONE/PULSE, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

Set the Flash Time

NOTE: If you are using this phone within the United States, there is no need to change the Flash Time from the default setting (0.7 seconds).

1Press G.

2Press -until the screen displays FLASH TIME, then press >.

3Press -or +to select the desired setting.

4Press Sto store your selection.

18

19

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin ContentsGlossary Audible Signals Features ListConnect the telephone line cords to the telephone InstallationTable/Desk Installation Install one 9V batteryWall Installation Mount the phone on the wall Connect the power adapter to the telephonePlug one end of the coiled handset cord into the jack on Convenience Ports SET UP System FeaturesAssign an Extension Number to Your Phone Turn Covm Indicator On or Off for Each LineChange Display Language Set the Time/DateAssign the Prime Line Line Preference Set Delay RingSet the Dial Mode Turn Line Usage On or Off for Each LineProgram Home and Local Area Codes Program the Centrex Console Delayed Ring TimeErase All Settings and Return the Phone to Default Settings Turn Hold Reminder On or OffSpeakerphone Telephone OperationMaking or Answering a Call HandsetDo Not Disturb TimerVolume Call PrivacyHold Switch Between LinesRedial Auto RedialTransfer a Call Low Battery IndicatorTemporary Tone Dialing Conference CallsStoring a Name and a Number in a Speed Dial Location Speed Dial OperationRemoving Information from a Speed Dial Location Reviewing Information Stored in a Speed Dial LocationEditing Information Stored in a Speed Dial Location Making a Speed Dial CallStoring a Pause in a Directory Number Storing a Temporary Tone Signal in a Directory NumberDirectory Operation Storing Names and Numbers in the DirectoryDialing a Number from the Directory Reviewing Information Stored in the DirectoryChanging Directory Entries Removing All Entries from the Directory Removing a Name and Number from the DirectoryIntercom Operation Answering a System-wide Switching Between an Intercom Call and a Single-phoneEnding an Intercom or Page Call Paging All PhonesCaller ID Operation Caller ID OperationMessage Waiting and NEW Call Light Call WaitingCalls Received on Two or More Lines Simultaneously Removing Calls from Call List Call ListDisplay Messages Time/Date Reset Covm IndicatorDialing a Number from Call List Saving a Number from Call List to the DirectoryCase of Difficulty Using a Fax SwitchAdding a FAX Machine No Caller ID Information While on a Call Tone Signals Do Not Activate a Remote DeviceOperation During a Power Failure Covm Line Indicator Remains OnPrivate Lines Expanding the 955 SystemLine Groups Centrex Operation All Removed! 38 AM/PM Area CODEs 7 IndexTONE/PULSE 6 Page Four-Line Intercom Speakerphone Speed Dial Operation pages
Top Page Image Contents