AT&T 955 user manual SET UP System Features, Convenience Ports

Page 9

INSTALLATION

Convenience Ports

If you want to connect another device (such as a modem or fax machine) to the wall jack, you can use the jacks on the phone labeled AUX. These convenience ports use Lines 3 and 4; a call picked up on Line 3 or 4 at another extension may interrupt a fax, modem, or message transmission.

SET UP SYSTEM FEATURES

Use the Navigation buttons to program or change the system features setup.

Store your
selection and	Scroll through
move to next	options

•Four One-Line Jacks

Modular

Telephone

Jacks

Lines 3 and

4with Two-line Adapter

Modular Telephone Jacks Lines 1 and 2 with Two-line Adapter

Standard

Electrical

Outlet

	feature
	Enter	Confirm
	Programming	Confirm
	Programming	option choice
	mode	option choice
	mode
		Used when
		resetting
		features to
	Exit Programming	default settings
	mode

Power Cord




Telephone Jack Aux L4

	Telephone Jack L1/L2
Telephone Jack Aux L3	Telephone Jack L3/L4

•Press Gto enter the Programming mode. The screen displays:

NOTE: If you do not press a key to continue programming within 20 seconds, the system automatically exits the Programming mode.

•Two Two-Line Jacks

Modular

Telephone Jack

Lines 3 and 4

Modular

Telephone Jack

Lines 1 and 2

Standard

Electrical

Outlet

•Press -or +repeatedly to move through the list of options.

•Press >to choose the option currently displayed.

•Press Sto store your selections and return to the ‘home screen’ for the feature currently displayed.

Feature

Options

Power Cord






Telephone Jack Aux L4				Telephone Jack L1/L2
Telephone Jack Aux L3				Telephone Jack L3/L4

You can set up one feature at a time or you can set up a feature and then move on to set up another feature. After you change one feature, press

+or -to select another feature. When you are finished with features setup, press Eto exit Programming mode.

NOTE: After a feature is successfully programmed, the system beeps once. If the system beeps twice, repeat the steps to set up the feature.

14

15

Image 9

Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin ContentsGlossary Audible Signals Features ListTable/Desk Installation InstallationInstall one 9V battery Connect the telephone line cords to the telephoneWall Installation Connect the power adapter to the telephone Plug one end of the coiled handset cord into the jack onMount the phone on the wall Convenience Ports SET UP System FeaturesChange Display Language Turn Covm Indicator On or Off for Each LineSet the Time/Date Assign an Extension Number to Your PhoneSet the Dial Mode Set Delay RingTurn Line Usage On or Off for Each Line Assign the Prime Line Line PreferenceErase All Settings and Return the Phone to Default Settings Program the Centrex Console Delayed Ring TimeTurn Hold Reminder On or Off Program Home and Local Area CodesMaking or Answering a Call Telephone OperationHandset SpeakerphoneVolume TimerCall Privacy Do Not DisturbRedial Switch Between LinesAuto Redial HoldTemporary Tone Dialing Low Battery IndicatorConference Calls Transfer a CallStoring a Name and a Number in a Speed Dial Location Speed Dial OperationEditing Information Stored in a Speed Dial Location Reviewing Information Stored in a Speed Dial LocationMaking a Speed Dial Call Removing Information from a Speed Dial LocationDirectory Operation Storing a Temporary Tone Signal in a Directory NumberStoring Names and Numbers in the Directory Storing a Pause in a Directory NumberReviewing Information Stored in the Directory Changing Directory EntriesDialing a Number from the Directory Removing All Entries from the Directory Removing a Name and Number from the DirectoryIntercom Operation Ending an Intercom or Page Call Switching Between an Intercom Call and a Single-phonePaging All Phones Answering a System-wideCaller ID Operation Caller ID OperationCall Waiting Calls Received on Two or More Lines SimultaneouslyMessage Waiting and NEW Call Light Call List Display MessagesRemoving Calls from Call List Dialing a Number from Call List Reset Covm IndicatorSaving a Number from Call List to the Directory Time/DateUsing a Fax Switch Adding a FAX MachineCase of Difficulty Operation During a Power Failure Tone Signals Do Not Activate a Remote DeviceCovm Line Indicator Remains On No Caller ID Information While on a CallExpanding the 955 System Line GroupsPrivate Lines Centrex Operation All Removed! 38 AM/PM Area CODEs 7 IndexTONE/PULSE 6 Page Four-Line Intercom Speakerphone Speed Dial Operation pages