INSTALLATION | INSTALLATION |
NOTE: If you are installing multiple phones in your 955 system, you must install and program one set at a time. If more than one extension is assigned the same extension number, a repeating short ring (error ring) will sound at all extensions. Reassign extension numbers, being sure that each extension has a different number from 11 to 22
2Connect the telephone line cords to the telephone.
•Four
(see “Assign an Extension Number to Your Phone” in SET UP SYSTEM FEATURES).
Table/Desk Installation
1 Install one 9V battery. | |
• | Press in on the tabs and remove the telephone base. |
• | Use a small Phillips head screwdriver to remove the screw |
| and open the battery door. |
| Modular |
| Telephone Jacks |
Lines 3 and 4 | |
Adapters |
|
Modular
Telephone Jacks
Lines 1 and 2
Standard
Electrical
Outlet
• | Insert the 9V battery (included), and replace the screw to |
| close the battery door. |
• | Replace the telephone base. |
Power Cord
NOTE: The battery retains telephone memory in the event of a power failure. If power fails and a working battery is installed, this phone will work only to dial and answer calls with the handset or headset. No other features will work until power is restored.
Telephone
Line Cords
•Two Two-Line Jacks
Modular
Telephone Jack
Lines 3 and 4
Telephone Jack L1/L2 Telephone Jack L3/L4
Modular | Standard | |
Telephone Jack | ||
Electrical | ||
Lines 1 and 2 | ||
Outlet | ||
|
Power Cord
Telephone |
|
Line Cords | Telephone Jack L1/L2 |
| |
| Telephone Jack L3/L4 |
8 | 9 |