AT&T 955 Dialing a Number from Call List, Saving a Number from Call List to the Directory

Page 27

CALLER ID OPERATION

Removing All Calls from Call List

1Press c. The screen displays the numbers of total calls and new calls in the call history.

2Press R. The screen prompts REMOVE: all?.

3Press Ragain within three seconds to confirm your decision. The screen displays for two seconds:

and then displays:

Dialing a Number from Call List

As you review calls in history, you can dial a displayed phone number. If the call information came from your Home Area Code (the one you programmed during features set up), the screen displays only the seven-digit number you are calling (without an area code). If the call information came from one of your Local Area Codes (the ones you programmed during features set up), the screen displays 10 digits (area code plus the seven-digit phone number). If the call information did not come from any of the area codes you programmed, 1) phone numbers with 10 or more digits will automatically have a “1” inserted and displayed before the number and, 2) phone numbers with fewer than 10 digits will be displayed and dialed without a “1.”

1Locate the number you wish to call in call history.

2Press and release o. The phone will automatically choose an available line and dial the call

— OR —

Press the LINE button for the line you wish to use, then press o to place the call.

CALLER ID OPERATION

Saving a Number from Call List to the Directory

1Locate the number you wish to store in call history.

2Press E.

3Press D. The screen displays DIRECTORY.

4Press S. The screen prompts (Enter name).

5Press cto copy the name and phone number from the call history to the screen.

6Edit the name (See “Changing Directory Entries” in DIRECTORY OPERATION.)

— OR —

Press Sto store the name and move on to edit the number.

7When the name and number appear as you would like to store them, press Sto store the information in the directory. The screen displays Saved!.

Time/Date

If you subscribe to Caller ID service, this phone automatically resets the time and date each time new information is received. You can set the time and date yourself if you wish. (See “Set the Time/Date” in SET UP SYSTEM FEATURES.)

Reset COVM Indicator

This feature is useful in case you get a false COVM signal from the Central Office. If a COVM indicator lights when there are no messages on that line, clear the indicators.

1Press G.

2Press -until the screen displays COVM RESET, then press >.

3Press -or +until the screen displays the desired line number, then press >. The screen displays:

4Press Rto reset. The screen displays RESET!.

5Repeat Steps 1-4to reset the COVM for additional lines.

50

51

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Part 1 Important Product Information Four-Line Intercom SpeakerphoneContents Before YOU Begin ContentsGlossary Audible Signals Features ListConnect the telephone line cords to the telephone InstallationTable/Desk Installation Install one 9V batteryWall Installation Connect the power adapter to the telephone Plug one end of the coiled handset cord into the jack onMount the phone on the wall Convenience Ports SET UP System FeaturesAssign an Extension Number to Your Phone Turn Covm Indicator On or Off for Each LineChange Display Language Set the Time/DateAssign the Prime Line Line Preference Set Delay RingSet the Dial Mode Turn Line Usage On or Off for Each LineProgram Home and Local Area Codes Program the Centrex Console Delayed Ring TimeErase All Settings and Return the Phone to Default Settings Turn Hold Reminder On or OffSpeakerphone Telephone OperationMaking or Answering a Call HandsetDo Not Disturb TimerVolume Call PrivacyHold Switch Between LinesRedial Auto RedialTransfer a Call Low Battery IndicatorTemporary Tone Dialing Conference CallsStoring a Name and a Number in a Speed Dial Location Speed Dial OperationRemoving Information from a Speed Dial Location Reviewing Information Stored in a Speed Dial LocationEditing Information Stored in a Speed Dial Location Making a Speed Dial CallStoring a Pause in a Directory Number Storing a Temporary Tone Signal in a Directory NumberDirectory Operation Storing Names and Numbers in the DirectoryReviewing Information Stored in the Directory Changing Directory EntriesDialing a Number from the Directory Removing All Entries from the Directory Removing a Name and Number from the DirectoryIntercom Operation Answering a System-wide Switching Between an Intercom Call and a Single-phoneEnding an Intercom or Page Call Paging All PhonesCaller ID Operation Caller ID OperationCall Waiting Calls Received on Two or More Lines SimultaneouslyMessage Waiting and NEW Call Light Call List Display MessagesRemoving Calls from Call List Time/Date Reset Covm IndicatorDialing a Number from Call List Saving a Number from Call List to the DirectoryUsing a Fax Switch Adding a FAX MachineCase of Difficulty No Caller ID Information While on a Call Tone Signals Do Not Activate a Remote DeviceOperation During a Power Failure Covm Line Indicator Remains OnExpanding the 955 System Line GroupsPrivate Lines Centrex Operation All Removed! 38 AM/PM Area CODEs 7 IndexTONE/PULSE 6 Page Four-Line Intercom Speakerphone Speed Dial Operation pages
Top Page Image Contents