AT&T 945 user manual Battery Installation

Page 13

INSTALLATION

If you are installing multiple phones in your telephone system, you must install and program one set at a time. If more than one extension

is assigned the same extension number, a repeating short ring (error ring) will sound at all extensions. Reassign extension numbers, being sure that each extension has a different number from 11 to 26 (see “Assign an Extension Number to Your Phone” on page 21).

Battery Installation

Install a 9V alkaline battery (purchased separately) in order to use some features of this telephone in the event of a power failure. If power fails and a working battery is installed, all four lines of this phone will work only to answer calls with the handset or headset, and to dial calls using the key pad and the One Touch or Redial features. No other features will work until power is restored.

1Remove the wedge from the underside of the base unit. Press on the tabs in the direction of the arrows and pull the wedge away from the phone.

2Remove the battery compartment screw with a small Phillips head screwdriver.

INSTALLATION

continued on page 10

9

Image 13

Contents Part 1 Important Product Information DRAFT#3Advanced American Telephones. All Rights Reserved Contents Adding a Product Overview Before YOU Begin Parts ListTools Needed Beforeyou Begin Set-Up for DSL Users DSL UsersGlossary Programmable Features List Automatic Audible Signals Battery Installation InstallationBattery Installation Two Two-Line Jacks Table/Desk InstallationConnect the power adapter to the telephone Table/Desk InstallationConnect the handset cord Check for dial toneWall Installation Mount the phone on the wall Four One-Line Jacks Wall InstallationTwo Two-Line Jacks Convenience Ports Standard electrical outlet AUX L4 jack AUX L3 jack Feature Setup Feature SetupSet One Touch Preference Rapid ScrollSet One Touch Preference To Your Phone Assign an Extension NumberAssign an Extension Number to Your Phone Turn the Ringer On or Off for Each Line Turn the Ringer On or Off for Each Line Select the Ringer Type Select the Ringer Type Press or to change the delay ring setting Off, 2 sec…30 sec Set Delay RingSet Delay Ring Turn Auto-Mute On or Off Turn Auto-Mute On or Off Set Dial Mode Set Dial Mode Press or to toggle between On and Off Turn Hold Reminder On or OffTurn Hold Reminder On or Off Set the Time and Date Set the Time and Date from Turn Line Usage On or Off for Each Line Turn Line Usage On or Off for Each Line Line Preference Assign the Prime LineAssign the Prime Line Line Preference Press or to toggle between Set Automatic ModeSet Automatic Mode Set the Scroll Rate Set the Scroll Rate Turn Screen Backlight On or Off Turn Screen Backlight On or Off Erase All Settings and Return the Phone to Default Settings Erase All Settings and Return the Phone to Default Settings Then, press E. The screen displays For this Phone Assign the Line GroupFeature Setup Console Phone Set This Phone to be the CentrexThen, press E. The screen displays Set the Centrex Console Delayed Ring Time Feature Setup Set the Display Language Make or Answer a Call Telephone OperationHandset Headset SpeakerphoneMake or Answer a Call To answer a call, press h. Press hTimer Switch Between Handset, Headset and SpeakerphoneRestore Call Privacy Cancel Call PrivacyCall Privacy Do Not DisturbRedial VolumeAuto Redial Redial StackHold Switch Between LinesMute To activate this feature, press and release MFlash Temporary Tone DialingTo talk privately with one party Conference CallsTo drop one line Blind Transfer Transfer a CallTransfer a Call and Speak to the Receiving Party Answer a Transferred Call Low Battery IndicatorLight Status Means Lights and What They MeanONE Touch Operation Store a Number in a One Touch Location Onetouch OperationStore a Pause in a One Touch Entry Store a Flash in a One Touch Entry Store Temporary Touch Tone signals in a One Touch EntryStore a Number in a One Touch Location Review a One Touch Entry Review a One Touch Entry If One Touch Preference is set to Intercom Dial a One Touch NumberIf One Touch Preference is set to Telephone Intercom Operation Intercom OperationOperation Function Basic Intercom OperationsMake an Intercom Call with the Handset Make an Intercom Call with Speakerphone or Headset End an Intercom or Page Call Answer an Intercom CallSingle-phone A Specific ExtensionAnswer a Single-phone Auto-Mute OffAnswer a System-wide All System PhonesMake an Intercom Conference Call Room MonitorAdding a FAX Machine Using a Fax SwitchGeneral Product Care Power Adapter Technical SpecificationsBattery Intercom Signal FrequencyNo Dial Tone Case of DifficultyTelephone Does Not RingSignal Not Received Error Ring Sounds atRepeating Short Ring All Extensions WhenTone Signals Do On When No Line isLine Lights Remain ConnectedOperation During Power FailureScreen Displays Display ScreenLine Groups Expanding the Phone SystemPrivate Lines Centrex Operation Setup ChecklistEnabling the Console Phone Console OperationAnswering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Autoredial IndexDND Lights Line 1 phone number Line button Private line Programming mode PRV Pulse Index