AT&T 945 Table/Desk Installation, Connect the handset cord, Check for dial tone, Initialization

Page 16

INSTALLATION

Table/Desk Installation

continued from page 11

2Connect the handset cord.

Plug one end of the coiled handset cord into the jack on the left side of the phone. Plug the other end into the handset and hang up.

3Connect the power adapter to the telephone.

Use only the power adapter provided with this product. To obtain a replacement, call 1 800 222–3111.

Plug one end of the power adapter into the jack labeled POWER on the back of the phone. Plug the other end into a standard electrical outlet not controlled by a wall switch.

Standard

Electrical

Outlet

POWER jack

Power adapter

4Check for dial tone.

Lift the handset and listen for a dial tone. If you cannot hear a dial tone, turn to IN CASE OF DIFFICULTY beginning on page 87.

5Initialization.

If no battery is installed when you connect the power cord, the phone runs a quick self-test and the screen displays Initializing.. for about three seconds.

NOTE: The phone will run through this same initialization any time it is reconnected to AC power if a charged battery is not installed (for example, after a power failure or when the unit has been unplugged).

12

Image 16

Contents DRAFT#3 Part 1 Important Product InformationAdvanced American Telephones. All Rights Reserved Contents Adding a Product Overview Before YOU Begin Parts ListTools Needed Beforeyou Begin DSL Users Set-Up for DSL UsersGlossary Programmable Features List Automatic Audible Signals Installation Battery InstallationBattery Installation Table/Desk Installation Two Two-Line JacksTable/Desk Installation Connect the power adapter to the telephoneConnect the handset cord Check for dial toneWall Installation Wall Installation Mount the phone on the wall Four One-Line JacksTwo Two-Line Jacks Convenience Ports Standard electrical outlet AUX L4 jack AUX L3 jack Feature Setup Feature SetupRapid Scroll Set One Touch PreferenceSet One Touch Preference Assign an Extension Number To Your PhoneAssign an Extension Number to Your Phone Turn the Ringer On or Off for Each Line Turn the Ringer On or Off for Each Line Select the Ringer Type Select the Ringer Type Set Delay Ring Press or to change the delay ring setting Off, 2 sec…30 secSet Delay Ring Turn Auto-Mute On or Off Turn Auto-Mute On or Off Set Dial Mode Set Dial Mode Turn Hold Reminder On or Off Press or to toggle between On and OffTurn Hold Reminder On or Off Set the Time and Date Set the Time and Date from Turn Line Usage On or Off for Each Line Turn Line Usage On or Off for Each Line Assign the Prime Line Line PreferenceAssign the Prime Line Line Preference Set Automatic Mode Press or to toggle betweenSet Automatic Mode Set the Scroll Rate Set the Scroll Rate Turn Screen Backlight On or Off Turn Screen Backlight On or Off Erase All Settings and Return the Phone to Default Settings Erase All Settings and Return the Phone to Default Settings Then, press E. The screen displays Assign the Line Group For this PhoneFeature Setup Set This Phone to be the Centrex Console PhoneThen, press E. The screen displays Set the Centrex Console Delayed Ring Time Feature Setup Set the Display Language Make or Answer a Call Telephone OperationHandset Speakerphone HeadsetMake or Answer a Call To answer a call, press h. Press hSwitch Between Handset, Headset and Speakerphone TimerCancel Call Privacy Restore Call PrivacyCall Privacy Do Not DisturbVolume RedialRedial Stack Auto RedialSwitch Between Lines HoldTo activate this feature, press and release M MuteFlash Temporary Tone DialingTo talk privately with one party Conference CallsTo drop one line Blind Transfer Transfer a CallTransfer a Call and Speak to the Receiving Party Low Battery Indicator Answer a Transferred CallLights and What They Mean Light Status MeansONE Touch Operation Onetouch Operation Store a Number in a One Touch LocationStore a Pause in a One Touch Entry Store a Flash in a One Touch Entry Store Temporary Touch Tone signals in a One Touch EntryStore a Number in a One Touch Location Review a One Touch Entry Review a One Touch Entry If One Touch Preference is set to Intercom Dial a One Touch NumberIf One Touch Preference is set to Telephone Intercom Operation Intercom OperationBasic Intercom Operations Operation FunctionMake an Intercom Call with the Handset Make an Intercom Call with Speakerphone or Headset Answer an Intercom Call End an Intercom or Page CallA Specific Extension Single-phoneAnswer a Single-phone Auto-Mute OffAll System Phones Answer a System-wideRoom Monitor Make an Intercom Conference CallUsing a Fax Switch Adding a FAX MachineGeneral Product Care Technical Specifications Power AdapterBattery Intercom Signal FrequencyCase of Difficulty No Dial ToneTelephone Does Not RingError Ring Sounds at Signal Not ReceivedRepeating Short Ring All Extensions WhenOn When No Line is Tone Signals DoLine Lights Remain ConnectedPower Failure Operation DuringScreen Displays Display ScreenExpanding the Phone System Line GroupsPrivate Lines Setup Checklist Centrex OperationEnabling the Console Phone Console OperationAnswering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Index AutoredialDND Lights Line 1 phone number Line button Private line Programming mode PRV Pulse Index