AT&T 945 user manual Case of Difficulty, No Dial Tone, Telephone Does, Not Ring

Page 91

IN CASE OF DIFFICULTY

If you have difficulty operating this phone, try the suggestions below.

For Customer Service, visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase.

To purchase accessories or replacement parts contact Customer Service. Visit our website at www.telephones.att.com

or call 1 800 222–3111.

TELEPHONE OPERATION

PROBLEM	SOLUTION
No Dial Tone	•	Make sure all plugs are connected properly.
		Inspect the line cord connections at the
		modular jack(s) and at the telephone.
		Also inspect the coiled handset cord con-
		nection at both ends.
	•	Make sure a line is selected.
	•	Make sure Hold is not activated.
	•	If you do not hear a dial tone when you
		press h, make sure the headset is
		firmly connected at the jack.

PROBLEM	SOLUTION
Telephone Does	•	Make sure the Do Not Disturb (DND)
Not Ring		feature is not activated.
	•	Make sure the ringers are turned on.
	•	If there are several non-system phones
		on the line that doesn’t ring, disconnect
		some of them. Having too many phones
		connected can also result in low ringer
		volume for non-system telephones.
	•	If the INTERCOM light flashes but you
		don’t hear a paging signal, make sure the
		Do Not Disturb feature is not activated.

IN CASE OF DIFFICULTY

87

Image 91

Contents Part 1 Important Product Information DRAFT#3Advanced American Telephones. All Rights Reserved Contents Adding a Product Overview Before YOU Begin Parts ListTools Needed Beforeyou Begin Set-Up for DSL Users DSL UsersGlossary Programmable Features List Automatic Audible Signals Battery Installation InstallationBattery Installation Two Two-Line Jacks Table/Desk InstallationCheck for dial tone Table/Desk InstallationConnect the power adapter to the telephone Connect the handset cordWall Installation Mount the phone on the wall Four One-Line Jacks Wall InstallationTwo Two-Line Jacks Convenience Ports Standard electrical outlet AUX L4 jack AUX L3 jack Feature Setup Feature SetupSet One Touch Preference Rapid ScrollSet One Touch Preference To Your Phone Assign an Extension NumberAssign an Extension Number to Your Phone Turn the Ringer On or Off for Each Line Turn the Ringer On or Off for Each Line Select the Ringer Type Select the Ringer Type Press or to change the delay ring setting Off, 2 sec…30 sec Set Delay RingSet Delay Ring Turn Auto-Mute On or Off Turn Auto-Mute On or Off Set Dial Mode Set Dial Mode Press or to toggle between On and Off Turn Hold Reminder On or OffTurn Hold Reminder On or Off Set the Time and Date Set the Time and Date from Turn Line Usage On or Off for Each Line Turn Line Usage On or Off for Each Line Line Preference Assign the Prime LineAssign the Prime Line Line Preference Press or to toggle between Set Automatic ModeSet Automatic Mode Set the Scroll Rate Set the Scroll Rate Turn Screen Backlight On or Off Turn Screen Backlight On or Off Erase All Settings and Return the Phone to Default Settings Erase All Settings and Return the Phone to Default Settings Then, press E. The screen displays For this Phone Assign the Line GroupFeature Setup Console Phone Set This Phone to be the CentrexThen, press E. The screen displays Set the Centrex Console Delayed Ring Time Feature Setup Set the Display Language Make or Answer a Call Telephone OperationHandset To answer a call, press h. Press h SpeakerphoneHeadset Make or Answer a CallTimer Switch Between Handset, Headset and SpeakerphoneDo Not Disturb Cancel Call PrivacyRestore Call Privacy Call PrivacyRedial VolumeAuto Redial Redial StackHold Switch Between LinesTemporary Tone Dialing To activate this feature, press and release MMute FlashTo talk privately with one party Conference CallsTo drop one line Blind Transfer Transfer a CallTransfer a Call and Speak to the Receiving Party Answer a Transferred Call Low Battery IndicatorLight Status Means Lights and What They MeanONE Touch Operation Store a Number in a One Touch Location Onetouch OperationStore a Pause in a One Touch Entry Store a Flash in a One Touch Entry Store Temporary Touch Tone signals in a One Touch EntryStore a Number in a One Touch Location Review a One Touch Entry Review a One Touch Entry If One Touch Preference is set to Intercom Dial a One Touch NumberIf One Touch Preference is set to Telephone Intercom Operation Intercom OperationOperation Function Basic Intercom OperationsMake an Intercom Call with the Handset Make an Intercom Call with Speakerphone or Headset End an Intercom or Page Call Answer an Intercom CallAuto-Mute Off A Specific ExtensionSingle-phone Answer a Single-phoneAnswer a System-wide All System PhonesMake an Intercom Conference Call Room MonitorAdding a FAX Machine Using a Fax SwitchGeneral Product Care Intercom Signal Frequency Technical SpecificationsPower Adapter BatteryNot Ring Case of DifficultyNo Dial Tone Telephone DoesAll Extensions When Error Ring Sounds atSignal Not Received Repeating Short RingConnected On When No Line isTone Signals Do Line Lights RemainDisplay Screen Power FailureOperation During Screen DisplaysLine Groups Expanding the Phone SystemPrivate Lines Console Operation Setup ChecklistCentrex Operation Enabling the Console PhoneAnswering a Delayed Ring Setting Ring Delay DurationPicking Up Another Station’s Line Autoredial IndexDND Lights Line 1 phone number Line button Private line Programming mode PRV Pulse Index