AT&T 945 user manual Wall Installation

Page 17

Wall Installation

For best results, follow the directions in “Battery Installation” on page 9 before installing the phone.

1If the wedge is still attached to the underside of the base unit, follow Step 1 in “Battery Installation” on page 9 to remove the wedge.

2Reverse the handset tab.

Hold down the switchhook, then pull out the handset tab and rotate it 180 degrees. Push the handset tab down into the grooves so it settles into position.

Switchhook

Handset tab

3Connect the telephone line cords to the telephone. Please refer to the line cord connection instructions in Step 1 of “Table/Desk Installation” on page 11.

4Connect the handset cord.

Plug one end of the coiled handset cord into the jack on the left side of the phone. Plug the other end into the handset and hang up.

5Connect the power adapter to the telephone.

Use only the power adapter provided with this product. To obtain a replacement, call 1 800 222–3111.

Plug one end of the power adapter into the jack labeled POWER on the back of the phone. Plug the power adapter into a standard electrical outlet not controlled by a wall switch.

Standard

Electrical

Outlet

POWER jack

Power adapter

continued on page 14

INSTALLATION

13

Image 17

Contents Part 1 Important Product Information DRAFT#3Advanced American Telephones. All Rights Reserved Contents Adding a Product Overview Tools Needed Parts ListBefore YOU Begin Beforeyou Begin Set-Up for DSL Users DSL UsersGlossary Programmable Features List Automatic Audible Signals Battery Installation InstallationBattery Installation Two Two-Line Jacks Table/Desk InstallationConnect the power adapter to the telephone Table/Desk InstallationConnect the handset cord Check for dial toneWall Installation Mount the phone on the wall Four One-Line Jacks Wall InstallationTwo Two-Line Jacks Convenience Ports Standard electrical outlet AUX L4 jack AUX L3 jack Feature Setup Feature SetupSet One Touch Preference Rapid ScrollSet One Touch Preference To Your Phone Assign an Extension NumberAssign an Extension Number to Your Phone Turn the Ringer On or Off for Each Line Turn the Ringer On or Off for Each Line Select the Ringer Type Select the Ringer Type Press or to change the delay ring setting Off, 2 sec…30 sec Set Delay RingSet Delay Ring Turn Auto-Mute On or Off Turn Auto-Mute On or Off Set Dial Mode Set Dial Mode Press or to toggle between On and Off Turn Hold Reminder On or OffTurn Hold Reminder On or Off Set the Time and Date Set the Time and Date from Turn Line Usage On or Off for Each Line Turn Line Usage On or Off for Each Line Line Preference Assign the Prime LineAssign the Prime Line Line Preference Press or to toggle between Set Automatic ModeSet Automatic Mode Set the Scroll Rate Set the Scroll Rate Turn Screen Backlight On or Off Turn Screen Backlight On or Off Erase All Settings and Return the Phone to Default Settings Erase All Settings and Return the Phone to Default Settings Then, press E. The screen displays For this Phone Assign the Line GroupFeature Setup Console Phone Set This Phone to be the CentrexThen, press E. The screen displays Set the Centrex Console Delayed Ring Time Feature Setup Set the Display Language Handset Telephone OperationMake or Answer a Call Headset SpeakerphoneMake or Answer a Call To answer a call, press h. Press hTimer Switch Between Handset, Headset and SpeakerphoneRestore Call Privacy Cancel Call PrivacyCall Privacy Do Not DisturbRedial VolumeAuto Redial Redial StackHold Switch Between LinesMute To activate this feature, press and release MFlash Temporary Tone DialingTo drop one line Conference CallsTo talk privately with one party Transfer a Call and Speak to the Receiving Party Transfer a CallBlind Transfer Answer a Transferred Call Low Battery IndicatorLight Status Means Lights and What They MeanONE Touch Operation Store a Number in a One Touch Location Onetouch OperationStore a Pause in a One Touch Entry Store a Number in a One Touch Location Store Temporary Touch Tone signals in a One Touch EntryStore a Flash in a One Touch Entry Review a One Touch Entry Review a One Touch Entry If One Touch Preference is set to Telephone Dial a One Touch NumberIf One Touch Preference is set to Intercom Intercom Operation Intercom OperationOperation Function Basic Intercom OperationsMake an Intercom Call with the Handset Make an Intercom Call with Speakerphone or Headset End an Intercom or Page Call Answer an Intercom CallSingle-phone A Specific ExtensionAnswer a Single-phone Auto-Mute OffAnswer a System-wide All System PhonesMake an Intercom Conference Call Room MonitorAdding a FAX Machine Using a Fax SwitchGeneral Product Care Power Adapter Technical SpecificationsBattery Intercom Signal FrequencyNo Dial Tone Case of DifficultyTelephone Does Not RingSignal Not Received Error Ring Sounds atRepeating Short Ring All Extensions WhenTone Signals Do On When No Line isLine Lights Remain ConnectedOperation During Power FailureScreen Displays Display ScreenLine Groups Expanding the Phone SystemPrivate Lines Centrex Operation Setup ChecklistEnabling the Console Phone Console OperationPicking Up Another Station’s Line Setting Ring Delay DurationAnswering a Delayed Ring Autoredial IndexDND Lights Line 1 phone number Line button Private line Programming mode PRV Pulse Index