AT&T System 25 manual Using Inspect, Deactivating Inspect

Inspect	❑
	✓

The inspect mode allows you to use your console display to get the following information:

■The extension number and associated name for either a call on hold or a call ringing at a LOOP button.

■The number of trunks available in a group of trunks represented by a FACILITY button.

■The number or code stored on a REP DIAL , LAST # DIALED , or FLEX DSS button.

■The name of the feature assigned to any other button.

NOTE: In the Inspect mode, your console is unavailable to new incoming calls. You also will not be able to perform call- handling procedures (such as hold, transfer, answering a call, etc.).

Using Inspect

1 Press INSPECT .

2 Press the button you want to inspect.

Deactivating Inspect

When you do any of the following, you automatically deactivate the Inspect feature:

1 Press INSPECT again;

2 Hang up the handset after being off-hook, lift the handset after-being on-hook, or press an idle LOOP button ;

or

3 Allow the display to be idle for 15 seconds.

28