Alcatel-Lucent 4019 Digital Identifying the terminal you are on, Lock / unlock your telephone

Programming your telephone

6.11 Identifying the terminal you are on

WhoAmI OK

6.12 Lock / unlock your telephone

		c	def	your telephone is
	OK	ab
		2	o
Lock			3
		jkl	m	locked/unlocked
			6
			n
		5

Enter your personal code

6.13 Call the associated set

The number of another set can be associated with your set number (see Modify the associated number). To call it:

Settings OK Services OK Consultation OK

Associate OK Call associate OK OK

Start the call

6.14 Forward your calls to the associated number

If you have previously defined an associated number, you can forward your calls to this number.

Settings OK Services OK Consultation OK Associate OK

Ovflw to associate OK OR Overflow if busy OR Ovflow busy/no ans

	For forwarding when you			For immediate	For forwarding if you
	do not answer		forwarding when your		do not answer or if you
				line is busy	are busy
OR	Deact ovflow assoc	OK	Apply	OK

To cancel the forwarding to associate function

6.15 Modify the associated number

The associated number can be a phone set number, the voice mail number or the pager number.

	Settings	OK	Services	OK	associated		OK
c	def				c	def	acceptance of the
2	3 o	OK		OK	2	o
ab			Modify			3
jkl	n				jkl	n	programming is displayed
	6					6
	m				5	m
5
Enter your					Enter the new
personal					associated
code					number

6.16 The Tandem configuration

This configuration lets you group two sets under a single call number. Your set is then the main set and the second set, usually a DECT set, is the secondary set. Each set has its own directory number, but the tandem number is that of the main set. When you receive a call, the two sets ring simultaneously. When one of the sets answers, the other set stops ringing. When all the lines of the main set are busy, the secondary (DECT) set does not ring. The secondary set can still be called by its own number, but in this case, the tandem function will no longer be taken into account. Most of the functions are common to the two sets, for example: forwarding, meet-me reminder, the various messages, etc., while others are specific to each set, for example: individual directory, last number redial, out of service, set padlock, etc.

For more information regarding this configuration, contact the person in charge of your installation.

23