Making/Answering Calls
Making calls
Using the handset
1Lift the handset and dial the phone number.
R To correct a digit, press MCLEARN.
2M 
N
3When you finish talking, press MOFFN or place the handset on the base unit or charger.
Using the speakerphone
1Dial the phone number and press MZN.
2 When you finish talking, press MOFFN.
Note:
RTo switch back to the receiver, press MZN/ M
N.
Making a call using the redial list
The last 5 phone numbers dialed are stored in the redial list (each 48 digits max.).
1MEN REDIAL
2MbN: Select the desired phone number.
3 M
N
Erasing a number in the redial list
1MEN REDIAL
2MbN: Select the desired phone number. a MERASEN
3MbN: “Yes” a MSELECTN a MOFFN
Using the base unit
Available for:
1MZN
2Dial the phone number.
3When the other party answers, speak into the microphone.
4When you finish talking, press MZN.
Note:
RWhile on a call, you can switch from the base unit to the handset:
–Press M
N on the handset, then press MZN on the base unit with the call sharing mode on (page 31).
–If the handset is on the base unit, simply lift it.
Redialing the last number dialed
MZN a MREDIALN
Adjusting the receiver or speaker volume
Handset / Base unit*1
*1
Press MjN or MkN repeatedly while talking.
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/or PIN in the phonebook, a pause is also needed (page 26).
Example: If you need to dial the line access number “9” when making outside calls with a PBX:
Handset
19 a MDN (Pause)
2Dial the phone number. a M
N
Base unit*1
*1
1MZN
29 a MPAUSEN
3Dial the phone number.
Note for handset and base unit:
RA 3.5 second pause is inserted each time you press MDN (Pause) on the handset or MPAUSEN on the base unit.
For assistance, please visit http://www.panasonic.com/help | 17 |