Base Unit Settings
Call Options and Other Options of Base Unit Settings must be operated with the cordless handset.
Call Options
To exit the operation, press at any time.
1 | Press JOYSTICK | 2 Select “ | Setting 3 | Enter |
| (or move). | Base”. |
| Unit PIN. |
|
|
|
| (Factory Preset 0000) |
4 | Select “Call Option”. |
|
|
|
|
|
|
| Go to step 5. |
Selecting the Recall Time
You can change the duration of the recall time depending on the requirements of your telephone company or PBX.
Follow steps 1 to 4 shown above, then:
5 Select “Recall”. |
| 6 Select “Type 1” (700 ms), “Type 2” | ||
|
| (100 ms) or “Type 3” (200 ms). | ||
|
|
|
|
|
|
|
|
|
|
Telephone System
•You can access Telstra’s “EASY CALL” service by having the recall time set at 100 ms (this is the factory preset setting), and then follow Telstra’s “EASY CALL” instructions to operate this service.
67