Multi-Unit User Operations
Transferring a Call to Another Registered Unit
&
The intercom can be used during a call to transfer an external call between registered units.
To exit the operation, press at any time.
Example: Cordless Handset 1 transfers a call to Cordless Handset 2
1
2
<Cordless Handset 1>
(During a call)
Press INTERCOM , then press the desired cordless handset number .
<Cordless Handset 2>
Press TALK .
3
(Conversation between Cordless Handset 1 and 2)
Press TALK OFF .
(Conversation between outside line and Cordless Handset 2)
•When you press on the cordless handset during a call, an outside line will be
held. To return to the conversation, press again.
•During an outside line is put on hold, and if the transferred call is not answered, you
can return to the conversation by pressing again.
•You can also answer a call by pressing , to , , or instead of
pressing (Any Key Talk).
•If you press after pressing the desired cordless handset number, a call can be transferred to another cordless handset without speaking to another cordless handset.
If the transferred call is not answered within 60 seconds, Cordless Handset 1 will ring again.
•When Cordless Handset 2 answers a transferred call, press to establish a
conference call or press to complete a call transfer.
84