Caller ID Service
L The ringer may be changed after the 2nd ring.
1Find the desired item (page 20). i {Option}
2{V}/{^}: “Ringer ID” i{Select}
3{V}/{^}: Select the desired setting.
4{Save} i{OFF}
Note:
L When you assign the ringer ID to an entry in the phonebook using one handset, it is applied for another handset.
Caller list
Important:
L Only 1 person can access the caller list at a time.
Viewing the caller list and calling back
1{View CID}
2Press {V} to search from the most recent call, or {^} to search from the
oldest call.
3To call back, press {C}. To exit, press {OFF}.
Note:
L If you do not want to dial the area codes when making calls from the caller list, you can store the area codes which you want the unit to delete automatically (page 29).
LIf the item has already been viewed or answered:
–“Q” is displayed.
–“Q” is displayed, even if the item was viewed or answered using
another handset.
LIf an arrow “→” is displayed after the
number, the whole phone number is not shown. Press {>} to see the
remaining numbers. To return to the previous display, press {<}.
Storing your area code
We recommend storing your area code before using Caller ID (page 28). Calls from the same area will be recorded in the caller list without the area code. You do not have to remove it before calling back the caller or storing in the phonebook.
1{MENU} i{#}{2}{5}{5}
2Enter your area code (8 digits max.).
L To correct a digit, press {<} or {>} to move the cursor, then press {Clear}. Enter the correct
number.
3{Save} i{OFF}
Note:
L The use of this feature can prevent a National Call from being dialled. For example, the “03” for South Island callers will be omitted and will therefore prevent a National Call to other areas of the South Island.
To erase your area code
1{MENU} i{#}{2}{5}{5}
2Press and hold {Clear} until all digits erased. i{Save} i {OFF}
29