Panasonic KX-TG4382NZ, KX-TG4392NZ Registration Problem Cause/solution, Handset Menu i#130

Useful Information

Registration

Problem	Cause/solution
The handset registration may	L Re-register the handset.
have been cancelled or the	1 Handset: {MENU} i{#}{1}{3}{0}
communication between the	2 Base unit:
base unit and the handset is	KX-TG4381/KX-TG4382
unstable.
	Press and hold {LOCATOR} for 4
	seconds. (No registration tone)
	KX-TG4391/KX-TG4392
	Press and hold {LOCATOR} for 4
	seconds until the registration tone
	sounds.
	– If another registered handset start
	ringing, press the same button to stop.
	Then repeat this step. (KX-TG4382/
	KX-TG4392)
	– The next step should be completed
	within 90 seconds.
	3 Handset: Press {OK}, then wait until a
	beep sounds. i{OFF}
	– While registering, “Base
	registering” is displayed on
	another handset. (KX-TG4382/
	KX-TG4392)
	If the registration fails, try to deregister the
	handset.
	KX-TG4381/KX-TG4391
	Press {MENU} i{#}{1}{3}{1} i
	{3}{3}{5} i{OK} i{1}, then re-register
	it again.
	KX-TG4382/KX-TG4392
	Use another handset to deregister the
	unstable handset. Press {MENU} i
	{#}{1}{3}{1} i{3}{3}{5} i{OK} i
	{1} or {2} (The handset number which you
	want to cancel). Try to re-register it again.
	L If the above remedy does not solve the
	problem, contact your nearest Panasonic
	service centre.

48