Special Features | ➡ |
◆◆ How to Use the Pause Feature
(For Analogue PBX Line/Long Distance Service Users)
We recommend you insert “X” if a pause is required for dialling with a PBX or to access a long distance service (When Xis pressed, ‘P’ is displayed on LCD).
Eg. Line access number K(PBX).
1.ZK, Xand then phone number.
2.ZO or %.
(After a few seconds, display will start showing the length of the call).
•Pressing Xonce creates a pause.
This prevents misdialling when you redial or dial a stored number.
•Pressing Xmore than once increases the length of the pause between numbers.
◆Using the Recall Feature
Mis used to access special telephone services (optional) such as call waiting
(When M is pressed ‘F’ is displayed on LCD). Contact your telephone company for details.
Example: Call waiting
When a call waiting tone is heard during a conversation:
a)To hold the existing call and accept the waiting call.
ZM
*Each time you ZM, you can switch between the first and second call.
*Depending on the provider, you may need to enter a code after pressing M. Follow the instructions given to you by your provider.
b)To accept the waiting call and hang up the existing call.
ZP. When the unit rings, ZO to anwser the new call.
c)To reject the waiting call.
Wait for the call waiting to time out. This will take about 40 seconds. If your unit is connected to a PBX, pressing M allows you to access some features of your host PBX such as transferring an extension call.
35