TG8011_8021BX(e).book Page 41 Monday, September 29, 2008 1:07 PM
Intercom/Locator
Transferring a call without speaking to the other handset user
1During an outside call, press {INT}. i Enter the desired handset number.
L kflashes to indicate the outside call is on hold.
2{ih}
L The outside call rings at the other handset.
Note:
L If the other handset user does not answer the call within 1 minute, the call rings at your handset again.
Answering a transferred call
Press {C} to answer the page.
Note:
L After the paging party disconnects, you can talk to the outside caller.
Handset locator
You can locate a misplaced handset by paging it.
1Base unit: Press {x}.
L All registered handsets beep for 1 minute.
2To stop paging:
Base unit: Press {x}.
Handset: Press {ih}.
Note:
L Even when the ringer volume for outside calls is set to off (page 23), the handset rings at a high level for paging.
41