Transferring calls, conference calls
Outside calls can be transferred between 2 handsets in the same radio cell.
2 handsets in the same radio cell can have a conference call with an outside party.
To make a conference call, the following
2 methods are available:
– Another person presses {C} while one person is talking with an outside party (“Call share”, page 19).
– One person pages another person during an outside call as follows.
1 During an outside call, press {INT} to put the call on hold.
2 Enter the desired handset number you want to transfer to.
3 Wait for the paged party to answer. L If the paged party does not
answer, press {INT} to return to the outside call.
4 To complete the transfer: Press {ih}.
L The outside call is routed to the handset.
To establish a conference call: Press {3}.
L To leave the conference, press {ih}. The other parties can continue the conversation.
TG8011_8021BX(e).book Page 40 Monday, September 29, 2008 1:07 PM
Intercom/Locator
Intercom
Intercom calls can be made between handsets in the same radio cell.
Note:
L If you receive an outside call while talking on the intercom, you hear interrupt tones.
To answer the call, press {ih}, then press {C}.
L When paging the handset for an intercom call, the paged handset beeps for 1 minute.
Making an intercom call
1{INT}
2To page a specific handset, enter the handset number.
L To stop paging, press {ih}.
3When you finish talking, press
{ih}.
Answering an intercom call
1Press {C} to answer the page.
2When you finish talking, press
{ih}.
Note:
L Even when the ringer volume for outside calls is set to off (page 23), the handset rings at a low level for intercom calls.
40