Panasonic KX-TG6421BX operating instructions Programmable settings Problem Cause/solution

TG6411-6421BX(e).book Page 40 Monday, April 27, 2009 3:13 PM

Useful Information

Problem	Cause/solution
I do not know how to erase y	L There are unviewed missed calls remaining.
(Missed call) from the display.	View them and erase yin the following way.
	1 8(middle soft key)
	2 {V}/{^}: “Caller List” i M
	3 Press {V} to search from the most recent
	call, or press {^} to search from the oldest
	call.
Programmable settings
Problem	Cause/solution
I have changed the display	L Change the display language (page 13).
language to a language I
cannot read.
While programming, the	L A call is being received. Answer the call and
handset starts to ring.	start again after hanging up.
While programming, the	L A call matching an entry in the call barred list
display returns to standby	is being received.*1 Wait and try again later.
mode.
I cannot register a handset to a	L You entered the wrong PIN. If you forget your
base unit.	PIN, contact your nearest Panasonic service
	centre.
	L Place the handset and the base unit away
	from other electrical appliances.
*1 KX-TG6421
Battery recharge
Problem	Cause/solution
The handset beeps and/or )	L Battery charge is low. Fully charge the
flashes.	batteries (page 8).
I fully charged the batteries, but	L Clean the charge contacts and charge again
)still flashes.	(page 9).
	L It is time to replace the batteries (page 8).
I fully charged the batteries, but	L Clean the battery ends (S, T) and the
the operating time seems to be	charge contacts with a dry cloth and charge
shorter.	again.
The handset display is blank.	L The handset is not turned on. Turn the power
	on (page 12).

40