Panasonic KX-TG6711FX operating instructions Icon Battery level, Operation Operating time

Page 10

Getting Started

Note when setting up

Note for connections

RThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

RThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

Note for battery installation

RUse the supplied rechargeable batteries. For replacement, we recommend using the Panasonic rechargeable batteries noted on page 3, 6.

RWipe the battery ends (, ) with a dry cloth.

RAvoid touching the battery ends (, ) or the unit contacts.

Note for battery charging

RIt is normal for the handset to feel warm during charging.

RClean the charge contacts of the handset, base unit, and charger with a soft and dry cloth once a month. Before cleaning the unit, disconnect from power outlets and any telephone line cords. Clean more often if the unit is exposed to grease, dust, or high humidity.

Battery level

Icon	Battery level
	High
	Medium
	Low
	Needs charging.

Panasonic Ni-MH battery performance (supplied batteries)

Operation		Operating time
In continuous use		15 hours max.

Not in use (standby)		170 hours max.

Note:

RIt is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).

RActual battery performance depends on usage and ambient environment.

REven after the batteries are fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries.

RThe battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the base unit or charger and let it charge for at least 7 hours.

10

TG6711FX(en)_0130_ver002.pdf 10

2012/01/30 18:56:53

Image 10

Contents Digital Cordless Phone Thank you for purchasing a Panasonic productTable of Contents Supplied accessories Accessory informationAdditional/replacement accessories For your future reference General informationExpanding your phone system Handset optional KX-TGA671FXFor your safety For best performance Important safety instructionsBattery Base unit location/avoiding noiseRoutine care Other informationFor business users in the European Union Standard SpecificationsRF transmission power Frequency rangeBattery charging Setting upBattery installation ConnectionsIcon Battery level Battery levelOperation Operating time Handset ControlsBase unit Handset soft key icons DisplayHandset display items MeaningDisplay language Turning the power on/offInitial settings Date and timeUsing the smart function key Top Key One touch eco modeDialling mode Setting the smart function key Top Key SetupWall mounting Making calls Answering callsUseful features during a CallKey lock Power back-up operationMbN Equalizer a 3 MbN Select the desired setting Call shareMaking calls during a power failure When only 1 handset is registeredHandset phonebook Copying all entries Copying phonebook entriesCopying an entry MbN Copy All aProgrammable settings Display the menu tree and direct command code tableRinger Setup Ringer Volume Send List Create Settings Message Centre1 *1, *3PBX Access # *1 Off Night ModeLine Setup Dial Mode*1 Pulse Display Setup LCD & Key BacklightTop Key Setup Cancel Register*13Start/End Night Mode On/OffRing Delay 30 sec 60 sec 90 sec 120 sec No Ringing First Ring *1, *7Turning night mode on/off AlarmNight mode Special programmingSubscribers only Setting the ring delay Storing unwanted callersIncoming call barring Caller ID Changing the handset nameChanging the base unit PIN Personal Identification Number Setting call restrictionChanging the unit’s region setting/Resetting the base unit Česká rep. = Czech Slovensko = SlovakiaRegistering a handset to the base unit Registering a unitOperating additional units Increasing the range of the base unitRegistering the Dect repeater KX-A405 to the base unit Dect repeaterCaller list Using Caller ID serviceCaller ID features Viewing the caller list and calling backErasing all caller information Editing a caller’s phone number before calling backErasing selected caller information Storing caller information to the phonebookStoring SMS message centre numbers Using SMSTurning SMS on/off Sending a messageErasing saved messages Receiving a messageEditing/sending a saved message Reading a received messageOther settings Voice mail service New messages, is displayed onHandset locator IntercomTransferring calls, conference calls Character entry modes When the unit displays the character entry screenCharacter entry Alphabet character table ABCExtended 2 character table Not available for SMS Greek character tableExtended 1 character table Cyrillic character table Not available for SMSCause/solution Error messagesDisplay message Problem TroubleshootingProgrammable settings General useBattery recharge Making/answering calls, intercomSMS Short Message Service Caller IDLiquid damage Index 2012/01/30 2012/01/30 Sales Department Czech Slovakia FX-2/3Romania