Programming
Note:
RAfter turning the repeater mode on or off,
is displayed on the handset momentarily. This is normal and the
handset can be used once is displayed.
Registering the DECT repeater (KX-A405) to the base unit
Note:
RPlease use a repeater that has not yet been registered to another unit. If the repeater is registered to another unit, deregister it first, referring to the Installation Guide for the DECT repeater.
1Base unit:
Press and hold MN for about 5 seconds. (No registration tone)
R The next step must be completed within 90 seconds.
2DECT repeater:
Connect the AC adaptor, then wait until
the indicator and indicator light green.
3Base unit:
To exit the registration mode, press MN.
30
TG6711FX(en)_0130_ver002.pdf 30
2012/01/30 18:56:54