
|
|
| Programming | |
Settings | Code |
| ||
Night Mode | On/Off | 1: On | #238 | 26 |
| Start/End | 0: <Off> |
|
|
| <23:00/06:00> | #237 | 27 | |
| Ring Delay | 1: 30 sec. | #239 | 27 |
|
| 2: <60 sec.> |
|
|
|
| 3: 90 sec. |
|
|
|
| 4: 120 sec. |
|
|
|
| 0: No Ringing |
|
|
First Ring*1, *7 | – | 1: <On> 0: Off | #173 | – |
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*3 If you select the unit’s region setting (page 28) to “Česká rep.” or “Slovensko”, the default setting will be changed for the selected country.
*4 If you select the unit’s region setting (page 28) to “Česká rep.” or “Slovensko”, the default setting is “On”.
*5 The ringer tone may continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2010 Copyrights Vision Inc.
*7 If you do not want the unit to ring before the caller information is received, set to “Off”. (Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which depends on your service provider/telephone company.
*8 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*10 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
*11 The default setting will be as follows if you select the following regional codes when changing the unit’s region setting (page 28):
“Česká rep.” = “100 msec.” “Slovensko” = “100 msec.”
*12 To prevent other users from joining your conversations with outside callers, turn this feature on.
*13 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
25
TG6711FX(en)_0130_ver002.pdf 25
2012/01/30 18:56:54