Panasonic KX-TG6711FX Making calls during a power failure, When only 1 handset is registered

Making/Answering Calls

Making calls during a power failure

nWhen only 1 handset is registered:

1 Lift the handset and dial the phone number.

2Within 1 minute, place the handset on the base unit.

R Wait until speakerphone is turned

on automatically and the call is made.

3When the other party answers the call, keep the handset on the base unit and talk using the speakerphone.

4When you finish talking, press

MN.

Note:

RIn step 2, if you do not place the handset on the base unit within 1 minute, the power back-up mode turns off. In this case, press

MN on the handset and dial the phone number. Then try again from step 2.

nWhen 2 or more handsets are registered: You should leave one handset on the base unit for supplying power, and use another handset for making calls. For the operation, please see “Making calls”, page 16.

Note:

RDuring a call with the handset placed on the base unit (power back-up mode), the call may be disconnected if you touch the handset. In such case, try to call back.

RThe range of the base unit is limited during a power failure. Please use the handset close to the base unit.

19

TG6711FX(en)_0130_ver002.pdf 19

2012/01/30 18:56:54