Panasonic kx-tcd725em General Problem Remedy, Re-install the handset batteries and try again

Page 94

KX-TCD725EM-5(86~100) 01.10.24 14:40 Page 94

Before Requesting Help

General

Problem

Remedy

The unit does not work.

•Turn the power ON (p. 12).

•Check the settings (p. 54).

•Charge the batteries fully (p. 11).

•Clean the charge contacts and charge again (p. 11).

•Unplug the AC adaptor and turn the power OFF to reset. Plug in the AC adaptor and turn the power ON. Then try again.

•The handset has been cancelled or has not been registered. Register the handset (p. 80).

•Re-install the handset batteries and try again.

You cannot program items such as the time/day adjustment.

•Programming is not possible while the unit is in the talk or intercom mode.

•Move closer to the base unit.

The battery strength is not displayed			•	Check that the battery type selection is correct
correctly.				(p. 52).

“		” flashes or the unit beeps every	•	Charge the batteries fully (p. 11).


15 seconds.

You charged the batteries fully, but			•	Clean the charge contacts and charge again (p. 11).
“		” flashes.	•	Install new batteries (p. 52, 86).

94

Image 94

Contents Operating Instructions Charge the batteries for about 15 hours before initial useImportant Information Method of connection For your future reference Accessories includedOptional accessories 08705 357357 Monday Friday 900am 530pmOperating range Base Unit LocationNoise Contents Programmable Function On the Base Unit Base Unit Location of ControlsHandset Back side SpeakerIcons DisplayHandset Display CharactersGetting Started Installing the Batteries in the HandsetConnections Battery information Battery ChargeMedium Making a Call Turning the Power ON/OFFBasic Start-up Operations Answering a CallTo play the pre-recorded greeting message Basic Answering System OperationsPre-Recorded Greeting Message To set the answering system onMaking a Call after Confirming the Entered Phone Number Making CallsRedial Call To make a hands-free phone conversation Calling Back with the Caller ListDigital Speakerphone For best performance on digital speakerphoneTo store an entered number into the phonebook Making Calls Auto TalkStoring a Dialled Number into the Phonebook To store a redial number into the phonebookAuto Talk Answering CallsTemporary Ringer OFF Display BacklightPaging the Handset from the Base Unit Handset Locator PagingSelecting the Ringer Type for Paging Caller ID Caller ID ServiceHow caller information is displayed when a call is received Checking the number of new callsViewing the Caller List When viewing long telephone numbersCaller List What meansPressing C erases the digit to the left of the cursor Editing the Caller’s Phone NumberEdit the number with the dialling Buttons, , , or C Counting as one digit pTo clear a selected caller information in the caller list Caller List Clearing Caller Information in the Caller ListTo clear all caller information in the caller list Press While Save Phonebook is at Arrow, press Storing Caller List Information into the PhonebookDialling buttons, , or C Phonebook Storing Caller Information into the PhonebookPrivate Category Feature Or wait for 60 secondsPhonebook Private Category Table For exampleSelecting Characters To change the character modeIf you make a mistake while entering a name Buttons Phonebook Character TableGreek AÄÅ Extended I Í N O Ó Ö O ó ö Q R S R s Ú Ü V t ú ü Blank Character TableButtons Extended Russian Button, move the cursor to the next spacePhonebook Editing a Caller Information in the Phonebook Clearing a Caller Information in the PhonebookTo find a name by initial Finding a Caller Information in the PhonebookPress until the name you desire to find is displayed Selected phone number is automatically dialled Phonebook Making a Call with the PhonebookTo hang up, press or place the handset on the base unit To make a call with hot key dial Hot Key DialTo store a caller information as hot key dial To clear a caller information in the hot key dialStation 1 Receiver During an intercom call, press Phonebook Phonebook CopyTo copy a selected caller information in the phonebook Phonebook is displayedTo copy all caller information in the phonebook Station 2 Sender PressFor Analogue PBX Line/Long Distance Service Users Special FeaturesPause Feature Key LockTo accept the waiting call and hang up the existing call Recall FeatureCall Waiting and Caller ID Compatible To reject the waiting callTo select the base unit Access pSettings p To clear the handsetTo set the direct call mode ON/OFF p To select the display language pChanging the 4-digit Handset PIN To Setting Handset, then pressHandset PIN Enter the new 4-digit handset PIN TwiceSetting the Alarm Time Time AlarmSetting the Time Alarm OFF To stop the time alarm Time Alarm Selecting the Ringer Type for Time AlarmAlarm Type, then press Ringer Option Selecting the Handset Ringer Volume/TypeTo select the handset ringer volume Ex. Level 6 is selectedTone Option Setting the Key Tone ON/OFFSetting the Call Waiting Tone ON/OFF Call Waiting, then pressSetting the Range Warning Alarm ON/OFF Setting the Battery Low Alarm ON/OFFWhile Standby Display is at Arrow, press Selecting the Standby Mode DisplayDisplay Option OFF, then pressOr Phone No., then press Selecting the Talk Mode DisplayTalk Display, then press Beep sounds Display will return to TalkDisplay Option Selecting the Display Language Press or to select the desired Language, then pressFactory preset is green Selecting the Display Backlight ColourCall Option To set the call prohibition mode ON/OFFCall Prohibition To set the direct call number To set the direct call modeDirect Call To dial the stored numberCurrent battery type is at the arrow Selecting the Battery TypePress or until the arrow points To Battery Type, then press Other OptionFunction Reset Handset SettingsFunction Initial setting Press or to select YESTo select the pause timing p To select the base unit ringer volume pTo reset the base unit settings p To change the 4-digit base unit PIN pSetting the 4-digit Base Unit PIN Base Unit PINSelecting the Selected Handsets Ringer Mode Ringer Mode SelectionSelecting the All Handsets Ringer Mode To Setting Base, then pressSelecting the Selected then All Handsets Ringer Mode With the dialling buttons 1 to Then pressCurrent ringer volume is displayed Base Unit Ringer VolumeSelecting the Base Unit Ringer Volume Press 2 TwiceOther Feature Selecting Time Break Recall/Earth Option ModeOther Feature Selecting the Pause Timing When you dial a restricted number Setting the Call RestrictionCall Restriction To cancel the call restriction numbers To cancel the call restricted handsetsCall Restriction Number of rings Reset the Base Unit SettingsAll handsets Flash timing 80m seconds Pause timing SecondsDate and Time Setting the Current TimeSetting the Current Date Entered numbers are displayed Ex is entered forSee corresponding pages for function details Summary of Answering System OperationsLights and voice guidance is heard from the speaker To record a greeting message p To playback a greeting message pTo record a memo message p To set the answering system on pGreeting Message To record your own greeting message with direct commandAnswering System Operations To record your own greeting message with function menuTo playback your own greeting message To erase your own greeting message with direct commandAnswering System Operations To set the answering systemTo playback new incoming/memo messages Message with direct commandIncoming/Memo Message To erase one incoming/memo message with function menuTo record a memo message with function menu To record a memo message with direct commandTo erase all incoming/memo messages with direct command To erase all incoming/memo messages with function menuDuring Playback an/a Greeting/Incoming/Memo Message During Playback an/a Incoming/Memo MessageQuick Play New Message Continue your conversation When finished, press then Setting the VOX Sens FunctionPress To set to LOW, press To set to HIGH, press Toll Saver When set to Auto Selecting Receiver Volume During PlaybackEach time you press or , the volume level will change Selecting the Number of RingsPress 1 , 2 or 3 to select the recording time Setting the Monitor Function ON/OFFTo set to ON, press To set to OFF, press Remote Operation from a Touch Tone Phone Summary of remote operationPress to set the remote operation OFF Beep sounds To change the remote code, repeat from stepVoice Menu Direct commands Turning on the answering systemOperating More than One Handset Optional Multi-Unit User OperationsOperating More than One Base Unit Registration Registering a Handset in the Base UnitSpecified base unit access Selecting the Base Unit AccessAutomatic base unit access Auto To Select Base, then pressTo Cancel Base, then press Cancelling a Base UnitEnter the handset numbers you desire to cancel To Registration, then pressIntercom between Handsets Handset When the unit rings, press to answerIntercom Handset Enter the desired handset numberTo transfer a call without using the intercom To transfer a call using the intercomIntercom Transferring a Call from One Handset to Another Conference Battery Replacement Replace the batteries with new ones as shownUseful Information Chapter Connecting the headset to the handset Using the Belt ClipUsing the optional Headset To adjust the headset receiver volume HIGH, Medium or LOWWall mounting Wall TemplateInstall the batteries and close the battery cover Option CoversBefore Requesting Help Problem RemedyCordless Telephone Before Requesting Help System with the handset Answering System Problem RemedyMemory is full. Erase some or all of the messages p Stops playbackFlashes Install new batteries p General Problem RemedyRe-install the handset batteries and try again CorrectlySafety Instructions Adding Another Phone Term Definitions Model No. KX-TCD725EM Panasonic Business Systems U.KReceipt No Date of Purchase Serial NoKX-TCD725EM-586~100 01.10.24 1440 Sales Department Panasonic Business Systems U.K Manufacturer’s DeclarationPQQX13076YA DU0701NR1101