Intercom/Locator
Transferring calls, conference calls
Outside calls can be transferred or a conference call with an outside party can be made:
–between 2 handsets
–between the handset and base unit
Handset
Example: When handset 1 transfers a call to handset 2 and/or establishes a conference call.
1Handset 1:
During an outside call, press {HOLD} to put the call on hold.
2Handset 1:
{V}/{^}: Select the desired unit. i
{CALL}
L If the paged party does not answer, press {C} to return to the outside call.
3Handset 2 (Receiver):
Press {C} to answer the page. L Handset 2 can talk with handset
1.
4Proceed with the desired operation.
■To transfer the call:
1 Handset 1: Press {OFF}.
2 Handset 2 (Receiver): Press {C}.
L Handset 2 can talk with the outside caller.
■To establish a conference call: Handset 1:
Press {CONF}.
L To leave the conference, press {OFF}. The other parties can continue the conversation.
L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}.
Note:
LIf you transfer a call from a handset to the base unit, the base unit user should press
Base unit
Available for:
Example: When the base unit transfers a call to a handset and/or establishes a conference call.
1Base unit:
During an outside call, press {INTERCOM} to put the call on hold.
When 2 or more handsets are registered:
–To page a specific handset, enter the handset number.
–To page all handsets, press {0} or wait for a few seconds.
L If paged party does not answer, press {INTERCOM} to return to the outside call.
2Handset: Press {C}.
L Handset can talk with the base unit.
3Proceed with the desired operation.
■To transfer the call:
1 Base unit: Press
2 Handset: Press {C}.
L Handset can talk with outside caller.
40For assistance, please visit http://www.panasonic.com/help