Panasonic KX-TG6431, KX-TG6445T, KX-TG6434, KX-TG6443 Liquid damage Problem Cause/solution

Page 49

	Useful Information

Problem	Cause/solution
I cannot operate the	L Someone is using the unit. Wait for the other user
answering system.	to finish.
	L A caller is leaving a message. Wait for the caller to
	finish.
	L The handset is too far from the base unit. Move
	closer.
I cannot operate the	L You are entering the wrong remote access code. If
answering system	you forgot the remote access code, store a new
remotely.	remote access code (page 34).
	L Press each key firmly.
	L The answering system is turned off. Turn it on
	(page 35).
	L You are using a rotary/pulse telephone. Try again
	using a touch-tone phone.
While recording a greeting	L A call is being received. Answer the call and try
message or listening to	again later.
messages, the unit rings
and the operation stops.

Liquid damage

Problem	Cause/solution
Liquid or other form of	L Disconnect the AC adaptor and telephone line
moisture has entered the	cord from the base unit. Remove the batteries
handset/base unit.	from the handset and leave to dry for at least 3
	days. After the handset/base unit are completely
	dry, reconnect the AC adaptor and telephone line
	cord. Insert the batteries and charge fully before
	use. If the unit does not work properly, contact an
	authorized service center.

Caution:

LTo avoid permanent damage, do not use a microwave oven to speed up the drying process.

For assistance, please visit http://www.panasonic.com/help

49

Image 49

Contents KX-TG6442 KX-TG6441KX-TG6443 KX-TG6444Voice Mail Service Caller ID ServiceIntroduction Important InformationModel composition Supplied accessories Accessory informationKX-TG Accessory item Order number Additional/replacement accessoriesOptional handset feature overview Feature Expanding your phone systemFor your safety Important safety instructions Specifications Battery installation Setting upBattery charge ConnectionsBattery level Icon During a power failureOperation Operating time Handset KX-TGA641 ControlsBase unit Locator Intercom Answer on DisplayRedial Pause Hold Flash Call Wait MuteDialing mode Initial settingsDisplay language Voice guidance languageRedial Using the base unitSP-PHONE Adjusting the base unit ringer volume Using the handsetAnswering calls Hold Useful features during a callMute FlashHandset clarity booster Temporary tone dialing for rotary/pulse service usersCall share Call WaitAdding entries Shared phonebookFinding and calling a phonebook entry SelectErasing entries Editing entriesChain dial OFFProgramming by scrolling through the display menus Programmable settingsMenu Main menu Sub-menuTalking CallerID Feature Setting code System Code Programming using the direct commandsPre-recorded Time adjust*10 Alarm Silent modeSpecial programming SaveADD Call block Caller ID subscribers onlyClear Operating additional units Registering a unitRegistering a handset to a base unit Caller ID features Using Caller ID serviceTalking Caller ID Missed callsCaller list Caller ID number auto edit featureRinger ID Viewing the caller list and calling backErasing all caller information Erasing selected caller informationStoring caller information to the phonebook Select iOFFTurning the answering system on/off Answering systemMemory capacity Call screeningGreeting message Listening to messages using the base unitErasing all messages Listening to messages using the handsetCalling back Caller ID subscribers only StopRemote operation Voice memoRemote commands Answering system settingsWhen the Spanish voice guidance is selected Turning on the answering system remotelyCaller’s recording time For voice mail service subscribersMessage alert Storing the voice mail VM access number Voice mail serviceTo erase the voice mail access number Voice mail VM tone detectionListening to voice mail messages Turning VM tone detection on/off The default setting is OnHandset locator IntercomMaking an intercom call Answering an intercom callHandset 2 Receiver Transferring calls, conference callsTo establish a conference call Handset Handset Press CTo establish a conference call Base unit Wall mounting Belt clipTo attach To remove the wall mounting adaptor ChargerDisplay message Cause/solution Error messagesGeneral use Problem Cause/solution TroubleshootingProgrammable settings Problem Cause/solution Battery recharge Problem Cause/solution Problem Cause/solutionMaking/answering calls, intercom Caller ID/Talking Caller ID Problem Cause/solution Answering system Problem Cause/solution Liquid damage Problem Cause/solution FCC and other information FCC RF Exposure Warning Correcto Incorrecto Guía Rápida EspañolaIdioma de la pantalla Teclas de funciónIdioma de la guía de voz Operaciones básicas Contestador de llamadas Unidad base Para grabar su propio mensaje Mensaje marcadorPreguntas frecuentes 1El auricular muestra Solución rápida de problemasHablar aparece 2El auricular no emite ningún tono de marcaciónCómo registrar un auricular a una unidad base Or, contact us via the web at Customer servicesTTY users hearing or speech impaired users can call Ship-In Service Warranty For United States and Puerto RicoPanasonic Consumer Electronics Company Parts Labor One 1 YearLimited Warranty Limits And Exclusions Index Call us at 1-800-211-PANA Read these Operating InstructionsFor your future reference Copyright