Programming
Block calls without phone number
You can reject a call without phone number including “Out of area”, “Private caller”, or “Long distance”.
1{MENU} i{#}{2}{4}{0}
2{V}/{^}: Select the desired setting. i{SAVE} i{OFF}
Viewing/editing/erasing call block numbers
1{MENU} i{#}{2}{1}{7}
2{V}/{^}: Select the desired entry. L To exit, press {OFF}.
3Proceed with the desired operation.
■Editing a number:
{EDIT} iEdit the phone number. i{SAVE} i{OFF}
■Erasing a number:
{ERASE} i{V}/{^}: “Yes” i{SELECT} i{OFF}
Note:
L When editing, press the desired dial key to add, {CLEAR} to erase.
LWhen viewing, {w/o NUM} appears if the block calls without phone number feature is turned on. To turn the feature off: {w/o NUM} i{V} i
{SAVE} i{OFF}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
L See page 5 for information on the available model.
Registering a handset to a base unit
The supplied handset and base unit are
1Handset:
{MENU} i{#}{1}{3}{0}
2Base unit:
Press and hold {LOCATOR} for about 4 seconds until the registration tone sounds.
L If all registered handsets start ringing, press the same button to stop. Then repeat this step.
L The next step must be completed within 90 seconds.
3Handset:
Press {OK}, then wait until a long beep sounds.
4{OFF}
Note:
LWhile registering, “Base regtr’ing” (Base registering) is displayed on all registered handsets.
L When you purchase an additional handset, refer to the additional handset’s installation manual for registration.
Deregistering a handset
A handset can cancel its own registration (or the registration of another handset) that is stored to the base unit. This allows the handset to end its wireless connection with the system.
1{MENU} i{#}{1}{3}{1}
2{3}{3}{5} i{OK}
3Select the handset you want to cancel by pressing the desired handset number.
4{V}/{^}: “Yes” i{SELECT}
For assistance, please visit http://www.panasonic.com/help | 27 |