Removing Open Scan Channels
When the radio is initially turned on, all 40 channels are programmed in the OPEN SCAN MEMORY.
If you do not wish to scan some particular channels (e.g. if one or more channels are continually busy and always causing the scanning function to pause), you can remove these channels from the scan group by using the following procedure:
1.Cancel scal)ning (if active).
2.Select the OPEN SCAN mode by pressing the OS/GS button when in the GS mode. The OS indicator should appear. The GS indicator should not appear.
3.Rotate the CHANNEL SELECTOR knob until the channel you wish to remove is displayed on the CHANNEL INDICATOR.
Note that the MEM indicator is lit, indicating that this channel is currently included in the scan group.
4.Press and hold the MEM button for about 1.5 seconds until a beep is heard twice.
MEM indicator .IS now off.
NOTE: The | Select | Remove | 'MEM'Icon |
Select | CHANNEL | CHANNEL | OFF |
|
| MEM |
|
|
| lLJ | OS LID |
|
| 1=1 | |
|
| 1 )) I |
|
|
| .... BEEPI'" |
|
The selected channel has now been removed from the scan group and will not be
included when scanning has commenced and the MEM indicator will not be displayed on that channel.
Continue steps 3 and 4 to remove any other channels you do not wish to scan.
Page 11