Uniden UH-099 owner manual Lf-Lf-Lf-fU, Tone TX Selcall Programming, Selecting 5 or 6 Tone Format

1. Select the channel that you and your group agreed to use for Selective Calling.

2. Press and hold the Tone Call Button for about 1.5 seconds. One long beep will be heard and the CAL indicator will appear on the LCD display while the SELCALL ID is being transmitted automatically.

An Acknowledge Tone coming from the called radio will be received if you had successfully made contact.

The Acknowledge Tone for the SUNDOWNER UH-099 is a succession of three Low Tone Beeps.

5/6 Tone TX SELCALL Programming

1.1Press the TC Button on the Microphone.

The TX SELCALL Code will be displayed. (Factory default: 00000)

" " " " "

L-Lf-Lf-Lf-fU

LFlaShing

Use the <] or t> to select the digit position. The selected digit will flash.

Rotate the 0 to change the active digit value.

Channel Knob

When finished, transmit the TX Selcall Code or press IMEM Ito store the code

ENT

onto memory.

1.2Selecting 5 or 6 Tone Format

1.21From 5 to 6 Tone Format Setting

While the 5th digit is flashing, Press the t> . A space bar [-] will appear and flash.

MEM

1-'

,; n ,; ,; ,-..\ I I.-os ~ l- I ~'LL~!b~!.!..=.. -

/1\

Page16