Uniden UH-099 owner manual Scanning, Programming Scan Channels

Scanning

Pressing the SCAN button one time will initiate scanning, and scanning is stopped either by pressing the button a second time or pressing the Press-to- Talk button.

Programming Scan Channels

When the radio is initially turned on, there will not be any channels programmed in the Group Scan Memory.

To Program scan channels into the Group Scan Memory, use the following proce- dure:

1.Select the NORMAL mode (or when scanning, cancel scanning by pressing the SCAN button.)

2.Select the GROUP SCAN mode by pressing the OS/GS button. The GS indicator should appear.

3.

4.

5.

Rotate the CHANNEL SELECTOR knob until the channel you wish to scan is displayed. Note that the MEM indicator should not appear, indicating that this

channel is not currently programmed in the GROUP SCAN memory.

Press and hold the MEM button for about 1.5 seconds until a beep is heard. The MEM indicator should now appear indicating that the channel is now pro- grammed in memory.

Continue steps 3 and 4 to program all the channels you wish to scan.

Select	Select	Select	Program	'MEM'lcon
NORMAL	GroupSCAN	CHANNEL	CHANNEL	...u,. ON
SCAN	OSIGS	IdII!n	Mal	"Ef(-
				11\
D	D		D	U',
1+1	1+	(0)	1+	GS ,'-'
			I) I
			.... BEEP!'"

Page 8